Click on Model to View Accessories
138-106865
The 138-106865 is a USB to RS232 Serial Adaptor/Converter cable. Ideal for today's needs where many computers are no longer designed with Serial Ports, this adaptor is the recommended model for use with Divelbiss controller products. It is based on the FTDI chipset. |
126-102860
Null Modem Programming cable, RS232. 6ft in length and connects 9-pin 'D' female to 9-pin 'D' female. |
|
ICM-HDPS-01
The ICM-HDPS-01 is an auxiliary power supply for High Density I/O Expanders. Typically used to provided I/O power when the number of I/O expanders will require more power than the Programmable Logic Controller (PLC) can provide. |
109-100924
Transformer for Programmable Logic Controller (PLC) input power. 230VAC Primary to 10VAC secondary @ 6 Amps maximum. |
|
PIMS-CA-6
Input power cable assembly. Provides flying leads to 3-pin connector for the Enhanced Baby Bear (ICM-EBB-XXX) and PCS Controllers. |
109-101153
Transformer for Programmable Logic Controller (PLC) input power. 115VAC Primary to 10VAC secondary @ 2 Amps maximum. |
|
109-101154
Transformer for Programmable Logic Controller (PLC) input power. 24VAC Primary to 10VAC secondary @ 2 Amps maximum. |
ICM-HDIO-01P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-01P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-02P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-02P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-03P
High DensityDigital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-03P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-04P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-04P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-06P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-06P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-07P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-07P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-08P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-08P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-09P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-09P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-10P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-10P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-11P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-11P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-12P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-12P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-13P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-13P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-14P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-14P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-15P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-15P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-16P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-16P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-17P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-17P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-19P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Din-rail mounted, the ICM-HDIO-19P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-20P
High Density Digital I/O Expansion Board with 8 plug-in slots for Opto-22 type 5VDC logic modules. Eight total slots provided inputs and outputs in any combination up to 8 total I/O points. Modules are available in many configurations and voltages. ICM-HDIO-20P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-22P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-22P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-23P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Din-rail mounted, the ICM-HDIO-23P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-24P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-24P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-25P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-25P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
130-105868
The 130-105868 is a din-rail mounted power supply. The 130-105868 accepts an input voltage of 85-264VAC and provides a 24VDC output rated up to 1.5 Amps. |
138-106865
The 138-106865 is a USB to RS232 Serial Adaptor/Converter cable. Ideal for today's needs where many computers are no longer designed with Serial Ports, this adaptor is the recommended model for use with Divelbiss controller products. It is based on the FTDI chipset. |
126-102860
Null Modem Programming cable, RS232. 6ft in length and connects 9-pin 'D' female to 9-pin 'D' female. |
|
ICM-HDPS-01
The ICM-HDPS-01 is an auxiliary power supply for High Density I/O Expanders. Typically used to provided I/O power when the number of I/O expanders will require more power than the Programmable Logic Controller (PLC) can provide. |
109-100924
Transformer for Programmable Logic Controller (PLC) input power. 230VAC Primary to 10VAC secondary @ 6 Amps maximum. |
|
PIMS-CA-6
Input power cable assembly. Provides flying leads to 3-pin connector for the Enhanced Baby Bear (ICM-EBB-XXX) and PCS Controllers. |
109-101153
Transformer for Programmable Logic Controller (PLC) input power. 115VAC Primary to 10VAC secondary @ 2 Amps maximum. |
|
109-101154
Transformer for Programmable Logic Controller (PLC) input power. 24VAC Primary to 10VAC secondary @ 2 Amps maximum. |
ICM-HDIO-01P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-01P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-02P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-02P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-03P
High DensityDigital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-03P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-04P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-04P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-06P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-06P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-07P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-07P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-08P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-08P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-09P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-09P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-10P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-10P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-11P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-11P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-12P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-12P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-13P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-13P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-14P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-14P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-15P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-15P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-16P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-16P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-17P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-17P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-19P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Din-rail mounted, the ICM-HDIO-19P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-20P
High Density Digital I/O Expansion Board with 8 plug-in slots for Opto-22 type 5VDC logic modules. Eight total slots provided inputs and outputs in any combination up to 8 total I/O points. Modules are available in many configurations and voltages. ICM-HDIO-20P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-22P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-22P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-23P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Din-rail mounted, the ICM-HDIO-23P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-24P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-24P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-25P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-25P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
130-105868
The 130-105868 is a din-rail mounted power supply. The 130-105868 accepts an input voltage of 85-264VAC and provides a 24VDC output rated up to 1.5 Amps. |
|
PCS-CA-PWM
The PCS-CA-PWM is a connection cable for PCS Controller models that have Pulse Width Modulation (PWM) Outputs. This PCS-CA-PWM is a ribbon cable that directly connects to the 10-pin PWM connector on the PCS Controller. The other end of the ribbon cable is open allowing it to be divided, strip and connected to other devices. |
138-106865
The 138-106865 is a USB to RS232 Serial Adaptor/Converter cable. Ideal for today's needs where many computers are no longer designed with Serial Ports, this adaptor is the recommended model for use with Divelbiss controller products. It is based on the FTDI chipset. |
126-102860
Null Modem Programming cable, RS232. 6ft in length and connects 9-pin 'D' female to 9-pin 'D' female. |
|
ICM-HDPS-01
The ICM-HDPS-01 is an auxiliary power supply for High Density I/O Expanders. Typically used to provided I/O power when the number of I/O expanders will require more power than the Programmable Logic Controller (PLC) can provide. |
109-100924
Transformer for Programmable Logic Controller (PLC) input power. 230VAC Primary to 10VAC secondary @ 6 Amps maximum. |
|
PIMS-CA-6
Input power cable assembly. Provides flying leads to 3-pin connector for the Enhanced Baby Bear (ICM-EBB-XXX) and PCS Controllers. |
109-101153
Transformer for Programmable Logic Controller (PLC) input power. 115VAC Primary to 10VAC secondary @ 2 Amps maximum. |
|
109-101154
Transformer for Programmable Logic Controller (PLC) input power. 24VAC Primary to 10VAC secondary @ 2 Amps maximum. |
ICM-HDIO-01P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-01P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-02P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-02P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-03P
High DensityDigital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-03P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-04P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-04P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-06P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-06P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-07P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-07P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-08P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-08P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-09P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-09P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-10P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-10P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-11P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-11P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-12P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-12P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-13P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-13P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-14P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-14P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-15P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-15P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-16P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-16P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-17P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-17P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-19P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Din-rail mounted, the ICM-HDIO-19P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-20P
High Density Digital I/O Expansion Board with 8 plug-in slots for Opto-22 type 5VDC logic modules. Eight total slots provided inputs and outputs in any combination up to 8 total I/O points. Modules are available in many configurations and voltages. ICM-HDIO-20P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-22P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-22P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-23P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Din-rail mounted, the ICM-HDIO-23P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-24P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-24P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-25P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-25P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
130-105868
The 130-105868 is a din-rail mounted power supply. The 130-105868 accepts an input voltage of 85-264VAC and provides a 24VDC output rated up to 1.5 Amps. |
|
PCS-CA-PWM
The PCS-CA-PWM is a connection cable for PCS Controller models that have Pulse Width Modulation (PWM) Outputs. This PCS-CA-PWM is a ribbon cable that directly connects to the 10-pin PWM connector on the PCS Controller. The other end of the ribbon cable is open allowing it to be divided, strip and connected to other devices. |
138-106865
The 138-106865 is a USB to RS232 Serial Adaptor/Converter cable. Ideal for today's needs where many computers are no longer designed with Serial Ports, this adaptor is the recommended model for use with Divelbiss controller products. It is based on the FTDI chipset. |
126-102860
Null Modem Programming cable, RS232. 6ft in length and connects 9-pin 'D' female to 9-pin 'D' female. |
|
ICM-HDPS-01
The ICM-HDPS-01 is an auxiliary power supply for High Density I/O Expanders. Typically used to provided I/O power when the number of I/O expanders will require more power than the Programmable Logic Controller (PLC) can provide. |
109-100924
Transformer for Programmable Logic Controller (PLC) input power. 230VAC Primary to 10VAC secondary @ 6 Amps maximum. |
|
PIMS-CA-6
Input power cable assembly. Provides flying leads to 3-pin connector for the Enhanced Baby Bear (ICM-EBB-XXX) and PCS Controllers. |
109-101153
Transformer for Programmable Logic Controller (PLC) input power. 115VAC Primary to 10VAC secondary @ 2 Amps maximum. |
|
109-101154
Transformer for Programmable Logic Controller (PLC) input power. 24VAC Primary to 10VAC secondary @ 2 Amps maximum. |
ICM-HDIO-01P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-01P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-02P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-02P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-03P
High DensityDigital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-03P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-04P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-04P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-06P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-06P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-07P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-07P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-08P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-08P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-09P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-09P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-10P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-10P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-11P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-11P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-12P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-12P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-13P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-13P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-14P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-14P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-15P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-15P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-16P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-16P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-17P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-17P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-19P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Din-rail mounted, the ICM-HDIO-19P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-20P
High Density Digital I/O Expansion Board with 8 plug-in slots for Opto-22 type 5VDC logic modules. Eight total slots provided inputs and outputs in any combination up to 8 total I/O points. Modules are available in many configurations and voltages. ICM-HDIO-20P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-22P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-22P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-23P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Din-rail mounted, the ICM-HDIO-23P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-24P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-24P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-25P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-25P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
130-105868
The 130-105868 is a din-rail mounted power supply. The 130-105868 accepts an input voltage of 85-264VAC and provides a 24VDC output rated up to 1.5 Amps. |
138-106865
The 138-106865 is a USB to RS232 Serial Adaptor/Converter cable. Ideal for today's needs where many computers are no longer designed with Serial Ports, this adaptor is the recommended model for use with Divelbiss controller products. It is based on the FTDI chipset. |
126-102860
Null Modem Programming cable, RS232. 6ft in length and connects 9-pin 'D' female to 9-pin 'D' female. |
|
ICM-HDPS-01
The ICM-HDPS-01 is an auxiliary power supply for High Density I/O Expanders. Typically used to provided I/O power when the number of I/O expanders will require more power than the Programmable Logic Controller (PLC) can provide. |
109-100924
Transformer for Programmable Logic Controller (PLC) input power. 230VAC Primary to 10VAC secondary @ 6 Amps maximum. |
|
PIMS-CA-6
Input power cable assembly. Provides flying leads to 3-pin connector for the Enhanced Baby Bear (ICM-EBB-XXX) and PCS Controllers. |
109-101153
Transformer for Programmable Logic Controller (PLC) input power. 115VAC Primary to 10VAC secondary @ 2 Amps maximum. |
|
109-101154
Transformer for Programmable Logic Controller (PLC) input power. 24VAC Primary to 10VAC secondary @ 2 Amps maximum. |
ICM-HDIO-01P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-01P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-02P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-02P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-03P
High DensityDigital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-03P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-04P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-04P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-06P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-06P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-07P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-07P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-08P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-08P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-09P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-09P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-10P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-10P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-11P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-11P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-12P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-12P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-13P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-13P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-14P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-14P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-15P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-15P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-16P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-16P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-17P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-17P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-19P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Din-rail mounted, the ICM-HDIO-19P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-20P
High Density Digital I/O Expansion Board with 8 plug-in slots for Opto-22 type 5VDC logic modules. Eight total slots provided inputs and outputs in any combination up to 8 total I/O points. Modules are available in many configurations and voltages. ICM-HDIO-20P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-22P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-22P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-23P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Din-rail mounted, the ICM-HDIO-23P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-24P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-24P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-25P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-25P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
130-105868
The 130-105868 is a din-rail mounted power supply. The 130-105868 accepts an input voltage of 85-264VAC and provides a 24VDC output rated up to 1.5 Amps. |
|
PCS-CA-PWM
The PCS-CA-PWM is a connection cable for PCS Controller models that have Pulse Width Modulation (PWM) Outputs. This PCS-CA-PWM is a ribbon cable that directly connects to the 10-pin PWM connector on the PCS Controller. The other end of the ribbon cable is open allowing it to be divided, strip and connected to other devices. |
138-106865
The 138-106865 is a USB to RS232 Serial Adaptor/Converter cable. Ideal for today's needs where many computers are no longer designed with Serial Ports, this adaptor is the recommended model for use with Divelbiss controller products. It is based on the FTDI chipset. |
126-102860
Null Modem Programming cable, RS232. 6ft in length and connects 9-pin 'D' female to 9-pin 'D' female. |
|
ICM-HDPS-01
The ICM-HDPS-01 is an auxiliary power supply for High Density I/O Expanders. Typically used to provided I/O power when the number of I/O expanders will require more power than the Programmable Logic Controller (PLC) can provide. |
109-100924
Transformer for Programmable Logic Controller (PLC) input power. 230VAC Primary to 10VAC secondary @ 6 Amps maximum. |
|
PIMS-CA-6
Input power cable assembly. Provides flying leads to 3-pin connector for the Enhanced Baby Bear (ICM-EBB-XXX) and PCS Controllers. |
109-101153
Transformer for Programmable Logic Controller (PLC) input power. 115VAC Primary to 10VAC secondary @ 2 Amps maximum. |
|
109-101154
Transformer for Programmable Logic Controller (PLC) input power. 24VAC Primary to 10VAC secondary @ 2 Amps maximum. |
ICM-HDIO-01P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-01P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-02P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-02P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-03P
High DensityDigital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-03P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-04P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-04P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-06P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-06P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-07P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-07P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-08P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-08P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-09P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-09P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-10P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-10P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-11P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-11P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-12P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-12P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-13P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-13P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-14P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-14P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-15P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-15P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-16P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-16P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-17P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-17P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-19P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Din-rail mounted, the ICM-HDIO-19P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-20P
High Density Digital I/O Expansion Board with 8 plug-in slots for Opto-22 type 5VDC logic modules. Eight total slots provided inputs and outputs in any combination up to 8 total I/O points. Modules are available in many configurations and voltages. ICM-HDIO-20P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-22P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-22P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-23P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Din-rail mounted, the ICM-HDIO-23P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-24P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-24P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-25P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-25P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
130-105868
The 130-105868 is a din-rail mounted power supply. The 130-105868 accepts an input voltage of 85-264VAC and provides a 24VDC output rated up to 1.5 Amps. |
|
PCS-CA-PWM
The PCS-CA-PWM is a connection cable for PCS Controller models that have Pulse Width Modulation (PWM) Outputs. This PCS-CA-PWM is a ribbon cable that directly connects to the 10-pin PWM connector on the PCS Controller. The other end of the ribbon cable is open allowing it to be divided, strip and connected to other devices. |
138-106865
The 138-106865 is a USB to RS232 Serial Adaptor/Converter cable. Ideal for today's needs where many computers are no longer designed with Serial Ports, this adaptor is the recommended model for use with Divelbiss controller products. It is based on the FTDI chipset. |
126-102860
Null Modem Programming cable, RS232. 6ft in length and connects 9-pin 'D' female to 9-pin 'D' female. |
|
ICM-HDPS-01
The ICM-HDPS-01 is an auxiliary power supply for High Density I/O Expanders. Typically used to provided I/O power when the number of I/O expanders will require more power than the Programmable Logic Controller (PLC) can provide. |
109-100924
Transformer for Programmable Logic Controller (PLC) input power. 230VAC Primary to 10VAC secondary @ 6 Amps maximum. |
|
PIMS-CA-6
Input power cable assembly. Provides flying leads to 3-pin connector for the Enhanced Baby Bear (ICM-EBB-XXX) and PCS Controllers. |
109-101153
Transformer for Programmable Logic Controller (PLC) input power. 115VAC Primary to 10VAC secondary @ 2 Amps maximum. |
|
109-101154
Transformer for Programmable Logic Controller (PLC) input power. 24VAC Primary to 10VAC secondary @ 2 Amps maximum. |
ICM-HDIO-01P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-01P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-02P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-02P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-03P
High DensityDigital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-03P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-04P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-04P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-06P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-06P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-07P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-07P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-08P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-08P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-09P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-09P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-10P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-10P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-11P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-11P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-12P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-12P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-13P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-13P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-14P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-14P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-15P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-15P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-16P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-16P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-17P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-17P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-19P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Din-rail mounted, the ICM-HDIO-19P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-20P
High Density Digital I/O Expansion Board with 8 plug-in slots for Opto-22 type 5VDC logic modules. Eight total slots provided inputs and outputs in any combination up to 8 total I/O points. Modules are available in many configurations and voltages. ICM-HDIO-20P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-22P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-22P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-23P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Din-rail mounted, the ICM-HDIO-23P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-24P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-24P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-25P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-25P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
130-105868
The 130-105868 is a din-rail mounted power supply. The 130-105868 accepts an input voltage of 85-264VAC and provides a 24VDC output rated up to 1.5 Amps. |
|
PCS-CA-PWM
The PCS-CA-PWM is a connection cable for PCS Controller models that have Pulse Width Modulation (PWM) Outputs. This PCS-CA-PWM is a ribbon cable that directly connects to the 10-pin PWM connector on the PCS Controller. The other end of the ribbon cable is open allowing it to be divided, strip and connected to other devices. |
138-106865
The 138-106865 is a USB to RS232 Serial Adaptor/Converter cable. Ideal for today's needs where many computers are no longer designed with Serial Ports, this adaptor is the recommended model for use with Divelbiss controller products. It is based on the FTDI chipset. |
126-102860
Null Modem Programming cable, RS232. 6ft in length and connects 9-pin 'D' female to 9-pin 'D' female. |
|
ICM-HDPS-01
The ICM-HDPS-01 is an auxiliary power supply for High Density I/O Expanders. Typically used to provided I/O power when the number of I/O expanders will require more power than the Programmable Logic Controller (PLC) can provide. |
109-100924
Transformer for Programmable Logic Controller (PLC) input power. 230VAC Primary to 10VAC secondary @ 6 Amps maximum. |
|
PIMS-CA-6
Input power cable assembly. Provides flying leads to 3-pin connector for the Enhanced Baby Bear (ICM-EBB-XXX) and PCS Controllers. |
109-101153
Transformer for Programmable Logic Controller (PLC) input power. 115VAC Primary to 10VAC secondary @ 2 Amps maximum. |
|
109-101154
Transformer for Programmable Logic Controller (PLC) input power. 24VAC Primary to 10VAC secondary @ 2 Amps maximum. |
ICM-HDIO-01P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-01P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-02P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-02P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-03P
High DensityDigital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-03P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-04P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-04P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-06P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-06P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-07P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-07P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-08P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-08P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-09P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-09P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-10P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-10P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-11P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-11P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-12P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-12P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-13P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-13P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-14P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-14P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-15P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-15P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-16P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-16P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-17P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-17P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-19P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Din-rail mounted, the ICM-HDIO-19P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-20P
High Density Digital I/O Expansion Board with 8 plug-in slots for Opto-22 type 5VDC logic modules. Eight total slots provided inputs and outputs in any combination up to 8 total I/O points. Modules are available in many configurations and voltages. ICM-HDIO-20P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-22P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-22P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-23P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Din-rail mounted, the ICM-HDIO-23P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-24P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-24P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-25P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-25P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
130-105868
The 130-105868 is a din-rail mounted power supply. The 130-105868 accepts an input voltage of 85-264VAC and provides a 24VDC output rated up to 1.5 Amps. |
|
PCS-CA-PWM
The PCS-CA-PWM is a connection cable for PCS Controller models that have Pulse Width Modulation (PWM) Outputs. This PCS-CA-PWM is a ribbon cable that directly connects to the 10-pin PWM connector on the PCS Controller. The other end of the ribbon cable is open allowing it to be divided, strip and connected to other devices. |
138-106865
The 138-106865 is a USB to RS232 Serial Adaptor/Converter cable. Ideal for today's needs where many computers are no longer designed with Serial Ports, this adaptor is the recommended model for use with Divelbiss controller products. It is based on the FTDI chipset. |
126-102860
Null Modem Programming cable, RS232. 6ft in length and connects 9-pin 'D' female to 9-pin 'D' female. |
|
ICM-HDPS-01
The ICM-HDPS-01 is an auxiliary power supply for High Density I/O Expanders. Typically used to provided I/O power when the number of I/O expanders will require more power than the Programmable Logic Controller (PLC) can provide. |
109-100924
Transformer for Programmable Logic Controller (PLC) input power. 230VAC Primary to 10VAC secondary @ 6 Amps maximum. |
|
PIMS-CA-6
Input power cable assembly. Provides flying leads to 3-pin connector for the Enhanced Baby Bear (ICM-EBB-XXX) and PCS Controllers. |
109-101153
Transformer for Programmable Logic Controller (PLC) input power. 115VAC Primary to 10VAC secondary @ 2 Amps maximum. |
|
109-101154
Transformer for Programmable Logic Controller (PLC) input power. 24VAC Primary to 10VAC secondary @ 2 Amps maximum. |
ICM-HDIO-01P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-01P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-02P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-02P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-03P
High DensityDigital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-03P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-04P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-04P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-06P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-06P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-07P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-07P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-08P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-08P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-09P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-09P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-10P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-10P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-11P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-11P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-12P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-12P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-13P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-13P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-14P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-14P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-15P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-15P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-16P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-16P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-17P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-17P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-19P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Din-rail mounted, the ICM-HDIO-19P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-20P
High Density Digital I/O Expansion Board with 8 plug-in slots for Opto-22 type 5VDC logic modules. Eight total slots provided inputs and outputs in any combination up to 8 total I/O points. Modules are available in many configurations and voltages. ICM-HDIO-20P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-22P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-22P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-23P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Din-rail mounted, the ICM-HDIO-23P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-24P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-24P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-25P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-25P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
130-105868
The 130-105868 is a din-rail mounted power supply. The 130-105868 accepts an input voltage of 85-264VAC and provides a 24VDC output rated up to 1.5 Amps. |
|
PCS-CA-PWM
The PCS-CA-PWM is a connection cable for PCS Controller models that have Pulse Width Modulation (PWM) Outputs. This PCS-CA-PWM is a ribbon cable that directly connects to the 10-pin PWM connector on the PCS Controller. The other end of the ribbon cable is open allowing it to be divided, strip and connected to other devices. |
138-106865
The 138-106865 is a USB to RS232 Serial Adaptor/Converter cable. Ideal for today's needs where many computers are no longer designed with Serial Ports, this adaptor is the recommended model for use with Divelbiss controller products. It is based on the FTDI chipset. |
126-102860
Null Modem Programming cable, RS232. 6ft in length and connects 9-pin 'D' female to 9-pin 'D' female. |
|
ICM-HDPS-01
The ICM-HDPS-01 is an auxiliary power supply for High Density I/O Expanders. Typically used to provided I/O power when the number of I/O expanders will require more power than the Programmable Logic Controller (PLC) can provide. |
109-100924
Transformer for Programmable Logic Controller (PLC) input power. 230VAC Primary to 10VAC secondary @ 6 Amps maximum. |
|
PIMS-CA-6
Input power cable assembly. Provides flying leads to 3-pin connector for the Enhanced Baby Bear (ICM-EBB-XXX) and PCS Controllers. |
109-101153
Transformer for Programmable Logic Controller (PLC) input power. 115VAC Primary to 10VAC secondary @ 2 Amps maximum. |
|
109-101154
Transformer for Programmable Logic Controller (PLC) input power. 24VAC Primary to 10VAC secondary @ 2 Amps maximum. |
ICM-HDIO-01P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-01P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-02P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-02P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-03P
High DensityDigital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-03P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-04P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-04P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-06P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-06P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-07P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-07P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-08P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-08P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-09P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-09P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-10P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-10P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-11P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-11P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-12P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-12P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-13P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-13P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-14P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-14P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-15P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-15P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-16P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-16P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-17P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-17P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-19P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Din-rail mounted, the ICM-HDIO-19P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-20P
High Density Digital I/O Expansion Board with 8 plug-in slots for Opto-22 type 5VDC logic modules. Eight total slots provided inputs and outputs in any combination up to 8 total I/O points. Modules are available in many configurations and voltages. ICM-HDIO-20P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-22P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-22P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-23P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Din-rail mounted, the ICM-HDIO-23P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-24P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-24P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-25P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-25P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
130-105868
The 130-105868 is a din-rail mounted power supply. The 130-105868 accepts an input voltage of 85-264VAC and provides a 24VDC output rated up to 1.5 Amps. |
|
PCS-CA-PWM
The PCS-CA-PWM is a connection cable for PCS Controller models that have Pulse Width Modulation (PWM) Outputs. This PCS-CA-PWM is a ribbon cable that directly connects to the 10-pin PWM connector on the PCS Controller. The other end of the ribbon cable is open allowing it to be divided, strip and connected to other devices. |
138-106865
The 138-106865 is a USB to RS232 Serial Adaptor/Converter cable. Ideal for today's needs where many computers are no longer designed with Serial Ports, this adaptor is the recommended model for use with Divelbiss controller products. It is based on the FTDI chipset. |
126-102860
Null Modem Programming cable, RS232. 6ft in length and connects 9-pin 'D' female to 9-pin 'D' female. |
|
ICM-HDPS-01
The ICM-HDPS-01 is an auxiliary power supply for High Density I/O Expanders. Typically used to provided I/O power when the number of I/O expanders will require more power than the Programmable Logic Controller (PLC) can provide. |
109-100924
Transformer for Programmable Logic Controller (PLC) input power. 230VAC Primary to 10VAC secondary @ 6 Amps maximum. |
|
PIMS-CA-6
Input power cable assembly. Provides flying leads to 3-pin connector for the Enhanced Baby Bear (ICM-EBB-XXX) and PCS Controllers. |
109-101153
Transformer for Programmable Logic Controller (PLC) input power. 115VAC Primary to 10VAC secondary @ 2 Amps maximum. |
|
109-101154
Transformer for Programmable Logic Controller (PLC) input power. 24VAC Primary to 10VAC secondary @ 2 Amps maximum. |
ICM-HDIO-01P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-01P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-02P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-02P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-03P
High DensityDigital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-03P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-04P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-04P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-06P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-06P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-07P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-07P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-08P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-08P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-09P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-09P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-10P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-10P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-11P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-11P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-12P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-12P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-13P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-13P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-14P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-14P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-15P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-15P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-16P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-16P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-17P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-17P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-19P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Din-rail mounted, the ICM-HDIO-19P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-20P
High Density Digital I/O Expansion Board with 8 plug-in slots for Opto-22 type 5VDC logic modules. Eight total slots provided inputs and outputs in any combination up to 8 total I/O points. Modules are available in many configurations and voltages. ICM-HDIO-20P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-22P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-22P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-23P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Din-rail mounted, the ICM-HDIO-23P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-24P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-24P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-25P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-25P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
130-105868
The 130-105868 is a din-rail mounted power supply. The 130-105868 accepts an input voltage of 85-264VAC and provides a 24VDC output rated up to 1.5 Amps. |
138-106865
The 138-106865 is a USB to RS232 Serial Adaptor/Converter cable. Ideal for today's needs where many computers are no longer designed with Serial Ports, this adaptor is the recommended model for use with Divelbiss controller products. It is based on the FTDI chipset. |
126-102860
Null Modem Programming cable, RS232. 6ft in length and connects 9-pin 'D' female to 9-pin 'D' female. |
|
ICM-HDPS-01
The ICM-HDPS-01 is an auxiliary power supply for High Density I/O Expanders. Typically used to provided I/O power when the number of I/O expanders will require more power than the Programmable Logic Controller (PLC) can provide. |
109-100924
Transformer for Programmable Logic Controller (PLC) input power. 230VAC Primary to 10VAC secondary @ 6 Amps maximum. |
|
PIMS-CA-6
Input power cable assembly. Provides flying leads to 3-pin connector for the Enhanced Baby Bear (ICM-EBB-XXX) and PCS Controllers. |
109-101153
Transformer for Programmable Logic Controller (PLC) input power. 115VAC Primary to 10VAC secondary @ 2 Amps maximum. |
|
109-101154
Transformer for Programmable Logic Controller (PLC) input power. 24VAC Primary to 10VAC secondary @ 2 Amps maximum. |
ICM-HDIO-01P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-01P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-02P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-02P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-03P
High DensityDigital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-03P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-04P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-04P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-06P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-06P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-07P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-07P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-08P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-08P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-09P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-09P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-10P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-10P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-11P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-11P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-12P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-12P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-13P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-13P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-14P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-14P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-15P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-15P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-16P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-16P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-17P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-17P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-19P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Din-rail mounted, the ICM-HDIO-19P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-20P
High Density Digital I/O Expansion Board with 8 plug-in slots for Opto-22 type 5VDC logic modules. Eight total slots provided inputs and outputs in any combination up to 8 total I/O points. Modules are available in many configurations and voltages. ICM-HDIO-20P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-22P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-22P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-23P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Din-rail mounted, the ICM-HDIO-23P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-24P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-24P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-25P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-25P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
130-105868
The 130-105868 is a din-rail mounted power supply. The 130-105868 accepts an input voltage of 85-264VAC and provides a 24VDC output rated up to 1.5 Amps. |
|
PCS-CA-PWM
The PCS-CA-PWM is a connection cable for PCS Controller models that have Pulse Width Modulation (PWM) Outputs. This PCS-CA-PWM is a ribbon cable that directly connects to the 10-pin PWM connector on the PCS Controller. The other end of the ribbon cable is open allowing it to be divided, strip and connected to other devices. |
138-106865
The 138-106865 is a USB to RS232 Serial Adaptor/Converter cable. Ideal for today's needs where many computers are no longer designed with Serial Ports, this adaptor is the recommended model for use with Divelbiss controller products. It is based on the FTDI chipset. |
126-102860
Null Modem Programming cable, RS232. 6ft in length and connects 9-pin 'D' female to 9-pin 'D' female. |
|
ICM-HDPS-01
The ICM-HDPS-01 is an auxiliary power supply for High Density I/O Expanders. Typically used to provided I/O power when the number of I/O expanders will require more power than the Programmable Logic Controller (PLC) can provide. |
109-100924
Transformer for Programmable Logic Controller (PLC) input power. 230VAC Primary to 10VAC secondary @ 6 Amps maximum. |
|
PIMS-CA-6
Input power cable assembly. Provides flying leads to 3-pin connector for the Enhanced Baby Bear (ICM-EBB-XXX) and PCS Controllers. |
109-101153
Transformer for Programmable Logic Controller (PLC) input power. 115VAC Primary to 10VAC secondary @ 2 Amps maximum. |
|
109-101154
Transformer for Programmable Logic Controller (PLC) input power. 24VAC Primary to 10VAC secondary @ 2 Amps maximum. |
ICM-HDIO-01P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-01P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-02P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-02P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-03P
High DensityDigital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-03P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-04P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-04P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-06P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-06P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-07P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-07P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-08P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-08P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-09P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-09P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-10P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-10P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-11P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-11P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-12P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-12P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-13P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-13P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-14P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-14P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-15P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-15P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-16P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-16P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-17P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-17P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-19P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Din-rail mounted, the ICM-HDIO-19P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-20P
High Density Digital I/O Expansion Board with 8 plug-in slots for Opto-22 type 5VDC logic modules. Eight total slots provided inputs and outputs in any combination up to 8 total I/O points. Modules are available in many configurations and voltages. ICM-HDIO-20P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-22P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-22P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-23P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Din-rail mounted, the ICM-HDIO-23P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-24P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-24P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-25P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-25P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
130-105868
The 130-105868 is a din-rail mounted power supply. The 130-105868 accepts an input voltage of 85-264VAC and provides a 24VDC output rated up to 1.5 Amps. |
|
PCS-CA-PWM
The PCS-CA-PWM is a connection cable for PCS Controller models that have Pulse Width Modulation (PWM) Outputs. This PCS-CA-PWM is a ribbon cable that directly connects to the 10-pin PWM connector on the PCS Controller. The other end of the ribbon cable is open allowing it to be divided, strip and connected to other devices. |
138-106865
The 138-106865 is a USB to RS232 Serial Adaptor/Converter cable. Ideal for today's needs where many computers are no longer designed with Serial Ports, this adaptor is the recommended model for use with Divelbiss controller products. It is based on the FTDI chipset. |
126-102860
Null Modem Programming cable, RS232. 6ft in length and connects 9-pin 'D' female to 9-pin 'D' female. |
|
ICM-HDPS-01
The ICM-HDPS-01 is an auxiliary power supply for High Density I/O Expanders. Typically used to provided I/O power when the number of I/O expanders will require more power than the Programmable Logic Controller (PLC) can provide. |
109-100924
Transformer for Programmable Logic Controller (PLC) input power. 230VAC Primary to 10VAC secondary @ 6 Amps maximum. |
|
PIMS-CA-6
Input power cable assembly. Provides flying leads to 3-pin connector for the Enhanced Baby Bear (ICM-EBB-XXX) and PCS Controllers. |
109-101153
Transformer for Programmable Logic Controller (PLC) input power. 115VAC Primary to 10VAC secondary @ 2 Amps maximum. |
|
109-101154
Transformer for Programmable Logic Controller (PLC) input power. 24VAC Primary to 10VAC secondary @ 2 Amps maximum. |
ICM-HDIO-01P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-01P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-02P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-02P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-03P
High DensityDigital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-03P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-04P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-04P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-06P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-06P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-07P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-07P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-08P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-08P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-09P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-09P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-10P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-10P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-11P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-11P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-12P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-12P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-13P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-13P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-14P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-14P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-15P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-15P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-16P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-16P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-17P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-17P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-19P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Din-rail mounted, the ICM-HDIO-19P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-20P
High Density Digital I/O Expansion Board with 8 plug-in slots for Opto-22 type 5VDC logic modules. Eight total slots provided inputs and outputs in any combination up to 8 total I/O points. Modules are available in many configurations and voltages. ICM-HDIO-20P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-22P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-22P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-23P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Din-rail mounted, the ICM-HDIO-23P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-24P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-24P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-25P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-25P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
OPTICFGTOOL-01
The OPTICFGTOOL-01 is the OptiCAN Configuration Tool Professional. This includes the software, USB-CAN interface and required cabling. The OPTICFGTOOL-01 allows the use of OptiCAN Networks of more than 10 nodes (drops) as well as providing additional software tools for diagnosing network issues. |
|
130-105868
The 130-105868 is a din-rail mounted power supply. The 130-105868 accepts an input voltage of 85-264VAC and provides a 24VDC output rated up to 1.5 Amps. |
138-106865
The 138-106865 is a USB to RS232 Serial Adaptor/Converter cable. Ideal for today's needs where many computers are no longer designed with Serial Ports, this adaptor is the recommended model for use with Divelbiss controller products. It is based on the FTDI chipset. |
126-102860
Null Modem Programming cable, RS232. 6ft in length and connects 9-pin 'D' female to 9-pin 'D' female. |
|
ICM-HDPS-01
The ICM-HDPS-01 is an auxiliary power supply for High Density I/O Expanders. Typically used to provided I/O power when the number of I/O expanders will require more power than the Programmable Logic Controller (PLC) can provide. |
109-100924
Transformer for Programmable Logic Controller (PLC) input power. 230VAC Primary to 10VAC secondary @ 6 Amps maximum. |
|
PIMS-CA-6
Input power cable assembly. Provides flying leads to 3-pin connector for the Enhanced Baby Bear (ICM-EBB-XXX) and PCS Controllers. |
109-101153
Transformer for Programmable Logic Controller (PLC) input power. 115VAC Primary to 10VAC secondary @ 2 Amps maximum. |
|
109-101154
Transformer for Programmable Logic Controller (PLC) input power. 24VAC Primary to 10VAC secondary @ 2 Amps maximum. |
ICM-HDIO-01P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-01P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-02P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-02P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-03P
High DensityDigital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-03P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-04P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-04P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-06P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-06P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-07P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-07P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-08P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-08P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-09P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-09P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-10P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-10P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-11P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-11P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-12P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-12P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-13P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-13P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-14P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-14P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-15P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-15P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-16P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-16P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-17P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-17P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-19P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Din-rail mounted, the ICM-HDIO-19P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-20P
High Density Digital I/O Expansion Board with 8 plug-in slots for Opto-22 type 5VDC logic modules. Eight total slots provided inputs and outputs in any combination up to 8 total I/O points. Modules are available in many configurations and voltages. ICM-HDIO-20P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-22P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-22P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-23P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Din-rail mounted, the ICM-HDIO-23P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-24P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-24P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-25P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-25P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
OPTICFGTOOL-01
The OPTICFGTOOL-01 is the OptiCAN Configuration Tool Professional. This includes the software, USB-CAN interface and required cabling. The OPTICFGTOOL-01 allows the use of OptiCAN Networks of more than 10 nodes (drops) as well as providing additional software tools for diagnosing network issues. |
|
PCS-CA-PWM
The PCS-CA-PWM is a connection cable for PCS Controller models that have Pulse Width Modulation (PWM) Outputs. This PCS-CA-PWM is a ribbon cable that directly connects to the 10-pin PWM connector on the PCS Controller. The other end of the ribbon cable is open allowing it to be divided, strip and connected to other devices. |
130-105868
The 130-105868 is a din-rail mounted power supply. The 130-105868 accepts an input voltage of 85-264VAC and provides a 24VDC output rated up to 1.5 Amps. |
138-106865
The 138-106865 is a USB to RS232 Serial Adaptor/Converter cable. Ideal for today's needs where many computers are no longer designed with Serial Ports, this adaptor is the recommended model for use with Divelbiss controller products. It is based on the FTDI chipset. |
126-102860
Null Modem Programming cable, RS232. 6ft in length and connects 9-pin 'D' female to 9-pin 'D' female. |
|
ICM-HDPS-01
The ICM-HDPS-01 is an auxiliary power supply for High Density I/O Expanders. Typically used to provided I/O power when the number of I/O expanders will require more power than the Programmable Logic Controller (PLC) can provide. |
109-100924
Transformer for Programmable Logic Controller (PLC) input power. 230VAC Primary to 10VAC secondary @ 6 Amps maximum. |
|
PIMS-CA-6
Input power cable assembly. Provides flying leads to 3-pin connector for the Enhanced Baby Bear (ICM-EBB-XXX) and PCS Controllers. |
109-101153
Transformer for Programmable Logic Controller (PLC) input power. 115VAC Primary to 10VAC secondary @ 2 Amps maximum. |
|
109-101154
Transformer for Programmable Logic Controller (PLC) input power. 24VAC Primary to 10VAC secondary @ 2 Amps maximum. |
ICM-HDIO-01P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-01P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-02P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-02P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-03P
High DensityDigital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-03P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-04P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-04P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-06P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-06P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-07P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-07P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-08P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-08P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-09P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-09P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-10P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-10P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-11P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-11P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-12P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-12P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-13P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-13P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-14P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-14P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-15P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-15P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-16P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-16P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-17P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-17P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-19P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Din-rail mounted, the ICM-HDIO-19P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-20P
High Density Digital I/O Expansion Board with 8 plug-in slots for Opto-22 type 5VDC logic modules. Eight total slots provided inputs and outputs in any combination up to 8 total I/O points. Modules are available in many configurations and voltages. ICM-HDIO-20P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-22P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-22P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-23P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Din-rail mounted, the ICM-HDIO-23P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-24P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-24P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-25P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-25P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
OPTICFGTOOL-01
The OPTICFGTOOL-01 is the OptiCAN Configuration Tool Professional. This includes the software, USB-CAN interface and required cabling. The OPTICFGTOOL-01 allows the use of OptiCAN Networks of more than 10 nodes (drops) as well as providing additional software tools for diagnosing network issues. |
|
PCS-CA-PWM
The PCS-CA-PWM is a connection cable for PCS Controller models that have Pulse Width Modulation (PWM) Outputs. This PCS-CA-PWM is a ribbon cable that directly connects to the 10-pin PWM connector on the PCS Controller. The other end of the ribbon cable is open allowing it to be divided, strip and connected to other devices. |
130-105868
The 130-105868 is a din-rail mounted power supply. The 130-105868 accepts an input voltage of 85-264VAC and provides a 24VDC output rated up to 1.5 Amps. |
138-106865
The 138-106865 is a USB to RS232 Serial Adaptor/Converter cable. Ideal for today's needs where many computers are no longer designed with Serial Ports, this adaptor is the recommended model for use with Divelbiss controller products. It is based on the FTDI chipset. |
126-102860
Null Modem Programming cable, RS232. 6ft in length and connects 9-pin 'D' female to 9-pin 'D' female. |
|
ICM-HDPS-01
The ICM-HDPS-01 is an auxiliary power supply for High Density I/O Expanders. Typically used to provided I/O power when the number of I/O expanders will require more power than the Programmable Logic Controller (PLC) can provide. |
109-100924
Transformer for Programmable Logic Controller (PLC) input power. 230VAC Primary to 10VAC secondary @ 6 Amps maximum. |
|
PIMS-CA-6
Input power cable assembly. Provides flying leads to 3-pin connector for the Enhanced Baby Bear (ICM-EBB-XXX) and PCS Controllers. |
109-101153
Transformer for Programmable Logic Controller (PLC) input power. 115VAC Primary to 10VAC secondary @ 2 Amps maximum. |
|
109-101154
Transformer for Programmable Logic Controller (PLC) input power. 24VAC Primary to 10VAC secondary @ 2 Amps maximum. |
ICM-HDIO-01P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-01P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-02P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-02P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-03P
High DensityDigital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-03P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-04P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-04P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-06P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-06P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-07P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-07P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-08P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-08P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-09P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-09P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-10P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-10P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-11P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-11P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-12P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-12P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-13P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-13P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-14P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-14P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-15P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-15P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-16P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-16P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-17P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-17P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-19P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Din-rail mounted, the ICM-HDIO-19P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-20P
High Density Digital I/O Expansion Board with 8 plug-in slots for Opto-22 type 5VDC logic modules. Eight total slots provided inputs and outputs in any combination up to 8 total I/O points. Modules are available in many configurations and voltages. ICM-HDIO-20P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-22P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-22P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-23P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Din-rail mounted, the ICM-HDIO-23P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-24P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-24P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-25P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-25P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
OPTICFGTOOL-01
The OPTICFGTOOL-01 is the OptiCAN Configuration Tool Professional. This includes the software, USB-CAN interface and required cabling. The OPTICFGTOOL-01 allows the use of OptiCAN Networks of more than 10 nodes (drops) as well as providing additional software tools for diagnosing network issues. |
|
130-105868
The 130-105868 is a din-rail mounted power supply. The 130-105868 accepts an input voltage of 85-264VAC and provides a 24VDC output rated up to 1.5 Amps. |
138-106865
The 138-106865 is a USB to RS232 Serial Adaptor/Converter cable. Ideal for today's needs where many computers are no longer designed with Serial Ports, this adaptor is the recommended model for use with Divelbiss controller products. It is based on the FTDI chipset. |
126-102860
Null Modem Programming cable, RS232. 6ft in length and connects 9-pin 'D' female to 9-pin 'D' female. |
|
ICM-HDPS-01
The ICM-HDPS-01 is an auxiliary power supply for High Density I/O Expanders. Typically used to provided I/O power when the number of I/O expanders will require more power than the Programmable Logic Controller (PLC) can provide. |
109-100924
Transformer for Programmable Logic Controller (PLC) input power. 230VAC Primary to 10VAC secondary @ 6 Amps maximum. |
|
PIMS-CA-6
Input power cable assembly. Provides flying leads to 3-pin connector for the Enhanced Baby Bear (ICM-EBB-XXX) and PCS Controllers. |
109-101153
Transformer for Programmable Logic Controller (PLC) input power. 115VAC Primary to 10VAC secondary @ 2 Amps maximum. |
|
109-101154
Transformer for Programmable Logic Controller (PLC) input power. 24VAC Primary to 10VAC secondary @ 2 Amps maximum. |
ICM-HDIO-01P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-01P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-02P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-02P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-03P
High DensityDigital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-03P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-04P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-04P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-06P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-06P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-07P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-07P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-08P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-08P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-09P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-09P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-10P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-10P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-11P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-11P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-12P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-12P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-13P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-13P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-14P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-14P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-15P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-15P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-16P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-16P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-17P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-17P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-19P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Din-rail mounted, the ICM-HDIO-19P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-20P
High Density Digital I/O Expansion Board with 8 plug-in slots for Opto-22 type 5VDC logic modules. Eight total slots provided inputs and outputs in any combination up to 8 total I/O points. Modules are available in many configurations and voltages. ICM-HDIO-20P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-22P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-22P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-23P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Din-rail mounted, the ICM-HDIO-23P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-24P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-24P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-25P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-25P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
OPTICFGTOOL-01
The OPTICFGTOOL-01 is the OptiCAN Configuration Tool Professional. This includes the software, USB-CAN interface and required cabling. The OPTICFGTOOL-01 allows the use of OptiCAN Networks of more than 10 nodes (drops) as well as providing additional software tools for diagnosing network issues. |
|
PCS-CA-PWM
The PCS-CA-PWM is a connection cable for PCS Controller models that have Pulse Width Modulation (PWM) Outputs. This PCS-CA-PWM is a ribbon cable that directly connects to the 10-pin PWM connector on the PCS Controller. The other end of the ribbon cable is open allowing it to be divided, strip and connected to other devices. |
130-105868
The 130-105868 is a din-rail mounted power supply. The 130-105868 accepts an input voltage of 85-264VAC and provides a 24VDC output rated up to 1.5 Amps. |
138-106865
The 138-106865 is a USB to RS232 Serial Adaptor/Converter cable. Ideal for today's needs where many computers are no longer designed with Serial Ports, this adaptor is the recommended model for use with Divelbiss controller products. It is based on the FTDI chipset. |
126-102860
Null Modem Programming cable, RS232. 6ft in length and connects 9-pin 'D' female to 9-pin 'D' female. |
|
ICM-HDPS-01
The ICM-HDPS-01 is an auxiliary power supply for High Density I/O Expanders. Typically used to provided I/O power when the number of I/O expanders will require more power than the Programmable Logic Controller (PLC) can provide. |
109-100924
Transformer for Programmable Logic Controller (PLC) input power. 230VAC Primary to 10VAC secondary @ 6 Amps maximum. |
|
PIMS-CA-6
Input power cable assembly. Provides flying leads to 3-pin connector for the Enhanced Baby Bear (ICM-EBB-XXX) and PCS Controllers. |
109-101153
Transformer for Programmable Logic Controller (PLC) input power. 115VAC Primary to 10VAC secondary @ 2 Amps maximum. |
|
109-101154
Transformer for Programmable Logic Controller (PLC) input power. 24VAC Primary to 10VAC secondary @ 2 Amps maximum. |
ICM-HDIO-01P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-01P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-02P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-02P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-03P
High DensityDigital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-03P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-04P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-04P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-06P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-06P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-07P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-07P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-08P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-08P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-09P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-09P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-10P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-10P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-11P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-11P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-12P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-12P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-13P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-13P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-14P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-14P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-15P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-15P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-16P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-16P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-17P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-17P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-19P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Din-rail mounted, the ICM-HDIO-19P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-20P
High Density Digital I/O Expansion Board with 8 plug-in slots for Opto-22 type 5VDC logic modules. Eight total slots provided inputs and outputs in any combination up to 8 total I/O points. Modules are available in many configurations and voltages. ICM-HDIO-20P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-22P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-22P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-23P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Din-rail mounted, the ICM-HDIO-23P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-24P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-24P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-25P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-25P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
OPTICFGTOOL-01
The OPTICFGTOOL-01 is the OptiCAN Configuration Tool Professional. This includes the software, USB-CAN interface and required cabling. The OPTICFGTOOL-01 allows the use of OptiCAN Networks of more than 10 nodes (drops) as well as providing additional software tools for diagnosing network issues. |
|
PCS-CA-PWM
The PCS-CA-PWM is a connection cable for PCS Controller models that have Pulse Width Modulation (PWM) Outputs. This PCS-CA-PWM is a ribbon cable that directly connects to the 10-pin PWM connector on the PCS Controller. The other end of the ribbon cable is open allowing it to be divided, strip and connected to other devices. |
130-105868
The 130-105868 is a din-rail mounted power supply. The 130-105868 accepts an input voltage of 85-264VAC and provides a 24VDC output rated up to 1.5 Amps. |
138-106865
The 138-106865 is a USB to RS232 Serial Adaptor/Converter cable. Ideal for today's needs where many computers are no longer designed with Serial Ports, this adaptor is the recommended model for use with Divelbiss controller products. It is based on the FTDI chipset. |
126-102860
Null Modem Programming cable, RS232. 6ft in length and connects 9-pin 'D' female to 9-pin 'D' female. |
|
ICM-HDPS-01
The ICM-HDPS-01 is an auxiliary power supply for High Density I/O Expanders. Typically used to provided I/O power when the number of I/O expanders will require more power than the Programmable Logic Controller (PLC) can provide. |
109-100924
Transformer for Programmable Logic Controller (PLC) input power. 230VAC Primary to 10VAC secondary @ 6 Amps maximum. |
|
PIMS-CA-6
Input power cable assembly. Provides flying leads to 3-pin connector for the Enhanced Baby Bear (ICM-EBB-XXX) and PCS Controllers. |
109-101153
Transformer for Programmable Logic Controller (PLC) input power. 115VAC Primary to 10VAC secondary @ 2 Amps maximum. |
|
109-101154
Transformer for Programmable Logic Controller (PLC) input power. 24VAC Primary to 10VAC secondary @ 2 Amps maximum. |
ICM-HDIO-01P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-01P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-02P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-02P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-03P
High DensityDigital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-03P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-04P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-04P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-06P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-06P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-07P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-07P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-08P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-08P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-09P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-09P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-10P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-10P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-11P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-11P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-12P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-12P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-13P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-13P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-14P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-14P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-15P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-15P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-16P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-16P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-17P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-17P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-19P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Din-rail mounted, the ICM-HDIO-19P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-20P
High Density Digital I/O Expansion Board with 8 plug-in slots for Opto-22 type 5VDC logic modules. Eight total slots provided inputs and outputs in any combination up to 8 total I/O points. Modules are available in many configurations and voltages. ICM-HDIO-20P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-22P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-22P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-23P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Din-rail mounted, the ICM-HDIO-23P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-24P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-24P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-25P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-25P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
OPTICFGTOOL-01
The OPTICFGTOOL-01 is the OptiCAN Configuration Tool Professional. This includes the software, USB-CAN interface and required cabling. The OPTICFGTOOL-01 allows the use of OptiCAN Networks of more than 10 nodes (drops) as well as providing additional software tools for diagnosing network issues. |
|
130-105868
The 130-105868 is a din-rail mounted power supply. The 130-105868 accepts an input voltage of 85-264VAC and provides a 24VDC output rated up to 1.5 Amps. |
138-106865
The 138-106865 is a USB to RS232 Serial Adaptor/Converter cable. Ideal for today's needs where many computers are no longer designed with Serial Ports, this adaptor is the recommended model for use with Divelbiss controller products. It is based on the FTDI chipset. |
126-102860
Null Modem Programming cable, RS232. 6ft in length and connects 9-pin 'D' female to 9-pin 'D' female. |
|
ICM-HDPS-01
The ICM-HDPS-01 is an auxiliary power supply for High Density I/O Expanders. Typically used to provided I/O power when the number of I/O expanders will require more power than the Programmable Logic Controller (PLC) can provide. |
109-100924
Transformer for Programmable Logic Controller (PLC) input power. 230VAC Primary to 10VAC secondary @ 6 Amps maximum. |
|
PIMS-CA-6
Input power cable assembly. Provides flying leads to 3-pin connector for the Enhanced Baby Bear (ICM-EBB-XXX) and PCS Controllers. |
109-101153
Transformer for Programmable Logic Controller (PLC) input power. 115VAC Primary to 10VAC secondary @ 2 Amps maximum. |
|
109-101154
Transformer for Programmable Logic Controller (PLC) input power. 24VAC Primary to 10VAC secondary @ 2 Amps maximum. |
ICM-HDIO-01P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-01P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-02P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-02P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-03P
High DensityDigital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-03P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-04P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-04P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-06P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-06P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-07P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-07P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-08P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-08P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-09P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-09P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-10P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-10P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-11P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-11P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-12P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-12P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-13P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-13P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-14P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-14P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-15P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-15P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-16P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-16P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-17P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-17P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-19P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Din-rail mounted, the ICM-HDIO-19P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-20P
High Density Digital I/O Expansion Board with 8 plug-in slots for Opto-22 type 5VDC logic modules. Eight total slots provided inputs and outputs in any combination up to 8 total I/O points. Modules are available in many configurations and voltages. ICM-HDIO-20P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-22P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-22P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-23P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Din-rail mounted, the ICM-HDIO-23P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-24P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-24P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-25P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-25P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
OPTICFGTOOL-01
The OPTICFGTOOL-01 is the OptiCAN Configuration Tool Professional. This includes the software, USB-CAN interface and required cabling. The OPTICFGTOOL-01 allows the use of OptiCAN Networks of more than 10 nodes (drops) as well as providing additional software tools for diagnosing network issues. |
|
PCS-CA-PWM
The PCS-CA-PWM is a connection cable for PCS Controller models that have Pulse Width Modulation (PWM) Outputs. This PCS-CA-PWM is a ribbon cable that directly connects to the 10-pin PWM connector on the PCS Controller. The other end of the ribbon cable is open allowing it to be divided, strip and connected to other devices. |
130-105868
The 130-105868 is a din-rail mounted power supply. The 130-105868 accepts an input voltage of 85-264VAC and provides a 24VDC output rated up to 1.5 Amps. |
138-106865
The 138-106865 is a USB to RS232 Serial Adaptor/Converter cable. Ideal for today's needs where many computers are no longer designed with Serial Ports, this adaptor is the recommended model for use with Divelbiss controller products. It is based on the FTDI chipset. |
126-102860
Null Modem Programming cable, RS232. 6ft in length and connects 9-pin 'D' female to 9-pin 'D' female. |
|
ICM-HDPS-01
The ICM-HDPS-01 is an auxiliary power supply for High Density I/O Expanders. Typically used to provided I/O power when the number of I/O expanders will require more power than the Programmable Logic Controller (PLC) can provide. |
109-100924
Transformer for Programmable Logic Controller (PLC) input power. 230VAC Primary to 10VAC secondary @ 6 Amps maximum. |
|
PIMS-CA-6
Input power cable assembly. Provides flying leads to 3-pin connector for the Enhanced Baby Bear (ICM-EBB-XXX) and PCS Controllers. |
109-101153
Transformer for Programmable Logic Controller (PLC) input power. 115VAC Primary to 10VAC secondary @ 2 Amps maximum. |
|
109-101154
Transformer for Programmable Logic Controller (PLC) input power. 24VAC Primary to 10VAC secondary @ 2 Amps maximum. |
ICM-HDIO-01P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-01P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-02P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-02P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-03P
High DensityDigital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-03P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-04P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-04P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-06P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-06P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-07P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-07P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-08P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-08P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-09P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-09P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-10P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-10P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-11P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-11P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-12P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-12P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-13P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-13P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-14P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-14P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-15P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-15P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-16P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-16P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-17P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-17P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-19P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Din-rail mounted, the ICM-HDIO-19P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-20P
High Density Digital I/O Expansion Board with 8 plug-in slots for Opto-22 type 5VDC logic modules. Eight total slots provided inputs and outputs in any combination up to 8 total I/O points. Modules are available in many configurations and voltages. ICM-HDIO-20P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-22P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-22P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-23P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Din-rail mounted, the ICM-HDIO-23P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-24P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-24P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-25P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-25P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
OPTICFGTOOL-01
The OPTICFGTOOL-01 is the OptiCAN Configuration Tool Professional. This includes the software, USB-CAN interface and required cabling. The OPTICFGTOOL-01 allows the use of OptiCAN Networks of more than 10 nodes (drops) as well as providing additional software tools for diagnosing network issues. |
|
PCS-CA-PWM
The PCS-CA-PWM is a connection cable for PCS Controller models that have Pulse Width Modulation (PWM) Outputs. This PCS-CA-PWM is a ribbon cable that directly connects to the 10-pin PWM connector on the PCS Controller. The other end of the ribbon cable is open allowing it to be divided, strip and connected to other devices. |
130-105868
The 130-105868 is a din-rail mounted power supply. The 130-105868 accepts an input voltage of 85-264VAC and provides a 24VDC output rated up to 1.5 Amps. |
138-106865
The 138-106865 is a USB to RS232 Serial Adaptor/Converter cable. Ideal for today's needs where many computers are no longer designed with Serial Ports, this adaptor is the recommended model for use with Divelbiss controller products. It is based on the FTDI chipset. |
126-102860
Null Modem Programming cable, RS232. 6ft in length and connects 9-pin 'D' female to 9-pin 'D' female. |
|
ICM-HDPS-01
The ICM-HDPS-01 is an auxiliary power supply for High Density I/O Expanders. Typically used to provided I/O power when the number of I/O expanders will require more power than the Programmable Logic Controller (PLC) can provide. |
109-100924
Transformer for Programmable Logic Controller (PLC) input power. 230VAC Primary to 10VAC secondary @ 6 Amps maximum. |
|
PIMS-CA-6
Input power cable assembly. Provides flying leads to 3-pin connector for the Enhanced Baby Bear (ICM-EBB-XXX) and PCS Controllers. |
109-101153
Transformer for Programmable Logic Controller (PLC) input power. 115VAC Primary to 10VAC secondary @ 2 Amps maximum. |
|
109-101154
Transformer for Programmable Logic Controller (PLC) input power. 24VAC Primary to 10VAC secondary @ 2 Amps maximum. |
ICM-HDIO-01P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-01P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-02P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-02P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-03P
High DensityDigital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-03P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-04P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-04P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-06P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-06P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-07P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-07P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-08P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-08P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-09P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-09P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-10P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-10P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-11P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-11P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-12P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-12P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-13P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-13P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-14P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-14P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-15P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-15P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-16P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-16P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-17P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-17P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-19P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Din-rail mounted, the ICM-HDIO-19P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-20P
High Density Digital I/O Expansion Board with 8 plug-in slots for Opto-22 type 5VDC logic modules. Eight total slots provided inputs and outputs in any combination up to 8 total I/O points. Modules are available in many configurations and voltages. ICM-HDIO-20P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-22P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-22P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-23P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Din-rail mounted, the ICM-HDIO-23P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-24P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-24P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-25P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-25P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
OPTICFGTOOL-01
The OPTICFGTOOL-01 is the OptiCAN Configuration Tool Professional. This includes the software, USB-CAN interface and required cabling. The OPTICFGTOOL-01 allows the use of OptiCAN Networks of more than 10 nodes (drops) as well as providing additional software tools for diagnosing network issues. |
|
130-105868
The 130-105868 is a din-rail mounted power supply. The 130-105868 accepts an input voltage of 85-264VAC and provides a 24VDC output rated up to 1.5 Amps. |
138-106865
The 138-106865 is a USB to RS232 Serial Adaptor/Converter cable. Ideal for today's needs where many computers are no longer designed with Serial Ports, this adaptor is the recommended model for use with Divelbiss controller products. It is based on the FTDI chipset. |
126-102860
Null Modem Programming cable, RS232. 6ft in length and connects 9-pin 'D' female to 9-pin 'D' female. |
|
ICM-HDPS-01
The ICM-HDPS-01 is an auxiliary power supply for High Density I/O Expanders. Typically used to provided I/O power when the number of I/O expanders will require more power than the Programmable Logic Controller (PLC) can provide. |
109-100924
Transformer for Programmable Logic Controller (PLC) input power. 230VAC Primary to 10VAC secondary @ 6 Amps maximum. |
|
PIMS-CA-6
Input power cable assembly. Provides flying leads to 3-pin connector for the Enhanced Baby Bear (ICM-EBB-XXX) and PCS Controllers. |
109-101153
Transformer for Programmable Logic Controller (PLC) input power. 115VAC Primary to 10VAC secondary @ 2 Amps maximum. |
|
109-101154
Transformer for Programmable Logic Controller (PLC) input power. 24VAC Primary to 10VAC secondary @ 2 Amps maximum. |
ICM-HDIO-01P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-01P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-02P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-02P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-03P
High DensityDigital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-03P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-04P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-04P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-06P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-06P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-07P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-07P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-08P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-08P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-09P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-09P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-10P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-10P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-11P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-11P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-12P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-12P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-13P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-13P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-14P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-14P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-15P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-15P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-16P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-16P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-17P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-17P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-19P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Din-rail mounted, the ICM-HDIO-19P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-20P
High Density Digital I/O Expansion Board with 8 plug-in slots for Opto-22 type 5VDC logic modules. Eight total slots provided inputs and outputs in any combination up to 8 total I/O points. Modules are available in many configurations and voltages. ICM-HDIO-20P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-22P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-22P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-23P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Din-rail mounted, the ICM-HDIO-23P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-24P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-24P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-25P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-25P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
OPTICFGTOOL-01
The OPTICFGTOOL-01 is the OptiCAN Configuration Tool Professional. This includes the software, USB-CAN interface and required cabling. The OPTICFGTOOL-01 allows the use of OptiCAN Networks of more than 10 nodes (drops) as well as providing additional software tools for diagnosing network issues. |
|
PCS-CA-PWM
The PCS-CA-PWM is a connection cable for PCS Controller models that have Pulse Width Modulation (PWM) Outputs. This PCS-CA-PWM is a ribbon cable that directly connects to the 10-pin PWM connector on the PCS Controller. The other end of the ribbon cable is open allowing it to be divided, strip and connected to other devices. |
130-105868
The 130-105868 is a din-rail mounted power supply. The 130-105868 accepts an input voltage of 85-264VAC and provides a 24VDC output rated up to 1.5 Amps. |
138-106865
The 138-106865 is a USB to RS232 Serial Adaptor/Converter cable. Ideal for today's needs where many computers are no longer designed with Serial Ports, this adaptor is the recommended model for use with Divelbiss controller products. It is based on the FTDI chipset. |
126-102860
Null Modem Programming cable, RS232. 6ft in length and connects 9-pin 'D' female to 9-pin 'D' female. |
|
ICM-HDPS-01
The ICM-HDPS-01 is an auxiliary power supply for High Density I/O Expanders. Typically used to provided I/O power when the number of I/O expanders will require more power than the Programmable Logic Controller (PLC) can provide. |
109-100924
Transformer for Programmable Logic Controller (PLC) input power. 230VAC Primary to 10VAC secondary @ 6 Amps maximum. |
|
PIMS-CA-6
Input power cable assembly. Provides flying leads to 3-pin connector for the Enhanced Baby Bear (ICM-EBB-XXX) and PCS Controllers. |
109-101153
Transformer for Programmable Logic Controller (PLC) input power. 115VAC Primary to 10VAC secondary @ 2 Amps maximum. |
|
109-101154
Transformer for Programmable Logic Controller (PLC) input power. 24VAC Primary to 10VAC secondary @ 2 Amps maximum. |
ICM-HDIO-01P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-01P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-02P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-02P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-03P
High DensityDigital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-03P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-04P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-04P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-06P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-06P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-07P
High Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-07P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-08P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-08P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-09P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-09P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-10P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-10P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-11P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-11P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-12P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-12P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-13P
High Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-13P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-14P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-14P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-15P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-15P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-16P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-16P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-17P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-17P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-19P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Din-rail mounted, the ICM-HDIO-19P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-20P
High Density Digital I/O Expansion Board with 8 plug-in slots for Opto-22 type 5VDC logic modules. Eight total slots provided inputs and outputs in any combination up to 8 total I/O points. Modules are available in many configurations and voltages. ICM-HDIO-20P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-22P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-22P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-23P
High Density Digital I/O Expansion Board with 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Din-rail mounted, the ICM-HDIO-23P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-24P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-24P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-25P
High Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-25P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
OPTICFGTOOL-01
The OPTICFGTOOL-01 is the OptiCAN Configuration Tool Professional. This includes the software, USB-CAN interface and required cabling. The OPTICFGTOOL-01 allows the use of OptiCAN Networks of more than 10 nodes (drops) as well as providing additional software tools for diagnosing network issues. |
|
PCS-CA-PWM
The PCS-CA-PWM is a connection cable for PCS Controller models that have Pulse Width Modulation (PWM) Outputs. This PCS-CA-PWM is a ribbon cable that directly connects to the 10-pin PWM connector on the PCS Controller. The other end of the ribbon cable is open allowing it to be divided, strip and connected to other devices. |
130-105868
The 130-105868 is a din-rail mounted power supply. The 130-105868 accepts an input voltage of 85-264VAC and provides a 24VDC output rated up to 1.5 Amps. |