Click on Model to View Accessories
HEC-1100The HEC-1100 is a Harsh Environment Series Digital I/O Expansion Module. The HEC-1100 is compatible with any OptiCAN enabled controller and provides additional digital I/O. The HEC-1100 is IP67 and be submersed in up to 3 feet of water. This module provides an additional 8 Inputs rated 8-32VDC and 8 Outputs rated 8-32VDC @ 2A. The HEC-1100 receives I/O commands via the OptiCAN Network via a CAN port. |
138-106865The 138-106865 is a USB to RS232 Serial Adaptor/Converter cable. Ideal for today's needs where many computers are no longer designed with Serial Ports, this adaptor is the recommended model for use with Divelbiss controller products. It is based on the FTDI chipset. |
|
HEC-P10The HEC-P10 is a connector kit for the P-Series Harsh Environment Family. It includes the pins and connector to interface to the P-Series Harsh Environment's 'A' Connector. |
HEC-PS5The HEC-PS5 isdesigned to operate with the Harsh Environment (HEC) product line. It is ideal for situations where 5VDC is required to operate external devices such as joysticks, etc. The HEC-PS5 operates on 8-32VDC and can supply 5VDC. The output current specification is based in input power and ambient temperature. |
|
HEC-P20The HEC-P20 is a connector kit for the P-Series Harsh Environment Family. It includes the pins and connector to interface to the P-Series Harsh Environment's 'B' Connector. |
HEC-OC-INTThe HEC-OC-INT converts field device open collector outputs for connection to standard HEC Inputs. The HEC-OC-INT converts outputs that are open collector (NPN) types for use with HEC products that have current sinking (PNP) input requirements. |
|
HEC-P30The HEC-P30 is a connector kit for the P-Series Harsh Environment Family. It includes the pins and connector to interface to the P-Series Harsh Environment's 'C' Connector. |
126-102860Null Modem Programming cable, RS232. 6ft in length and connects 9-pin 'D' female to 9-pin 'D' female. |
|
HEC-P40The HEC-P40 is a connector kit for the P-Series Harsh Environment Family. It includes the pins and connector to interface to the P-Series Harsh Environment's 'D' Connector. |
138-1088981 GB SLC MicroSD Flash card with extended temperature range for data logging and storage on P-Series PLC on a Chip â„¢ based products. |
|
HEC-P100The HEC-P100 is a cable assembly for the P-Series Harsh Environment Family. The HEC-P100 is a pre-wired assembly for the 'A' Connector with flying leads on the opposite end. |
138-1078102 GB SLC MicroSD Flash card with extended temperature range for data logging and storage on P-Series PLC on a Chip â„¢ based products. |
|
HEC-P110The HEC-P110 is a cable assembly for the P-Series Harsh Environment Family. The HEC-P110 is a pre-wired assembly for the 'B' Connector with flying leads on the opposite end. |
HEC-P910The HEC-P910 is a programming breakout cable for the P-Series Harsh Environment Controllers. One end of the cable connects directly to the P-Series Harsh Environment Controller and splits the other end into one Deutsch connector and one 9-pin D-sub connector (one for the original 'A' connector and one for the program cable). The HEC-P910 is connected in place of the 'A' connector and then the original 'A' connector is plugged into the Deutsch connector. A Null Modem cable is required for programming and connects to the 9-pin d-sub connector and to the computer's serial port. |
|
HEC-P120The HEC-P120 is a cable assembly for the P-Series Harsh Environment Family. The HEC-P120 is a pre-wired assembly for the 'C' Connector with flying leads on the opposite end.
|
HEC-P130The HEC-P130 is a cable assembly for the P-Series Harsh Environment Family. The HEC-P130 is a pre-wired assembly for the 'D' Connector with flying leads on the opposite end. |
|
OPTICFGTOOL-01The OPTICFGTOOL-01 is the OptiCAN Configuration Tool Professional. This includes the software, USB-CAN interface and required cabling. The OPTICFGTOOL-01 allows the use of OptiCAN Networks of more than 10 nodes (drops) as well as providing additional software tools for diagnosing network issues. |
HEC-1100The HEC-1100 is a Harsh Environment Series Digital I/O Expansion Module. The HEC-1100 is compatible with any OptiCAN enabled controller and provides additional digital I/O. The HEC-1100 is IP67 and be submersed in up to 3 feet of water. This module provides an additional 8 Inputs rated 8-32VDC and 8 Outputs rated 8-32VDC @ 2A. The HEC-1100 receives I/O commands via the OptiCAN Network via a CAN port. |
138-106865The 138-106865 is a USB to RS232 Serial Adaptor/Converter cable. Ideal for today's needs where many computers are no longer designed with Serial Ports, this adaptor is the recommended model for use with Divelbiss controller products. It is based on the FTDI chipset. |
|
HEC-P10The HEC-P10 is a connector kit for the P-Series Harsh Environment Family. It includes the pins and connector to interface to the P-Series Harsh Environment's 'A' Connector. |
HEC-PS5The HEC-PS5 isdesigned to operate with the Harsh Environment (HEC) product line. It is ideal for situations where 5VDC is required to operate external devices such as joysticks, etc. The HEC-PS5 operates on 8-32VDC and can supply 5VDC. The output current specification is based in input power and ambient temperature. |
|
HEC-P20The HEC-P20 is a connector kit for the P-Series Harsh Environment Family. It includes the pins and connector to interface to the P-Series Harsh Environment's 'B' Connector. |
HEC-OC-INTThe HEC-OC-INT converts field device open collector outputs for connection to standard HEC Inputs. The HEC-OC-INT converts outputs that are open collector (NPN) types for use with HEC products that have current sinking (PNP) input requirements. |
|
HEC-P30The HEC-P30 is a connector kit for the P-Series Harsh Environment Family. It includes the pins and connector to interface to the P-Series Harsh Environment's 'C' Connector. |
126-102860Null Modem Programming cable, RS232. 6ft in length and connects 9-pin 'D' female to 9-pin 'D' female. |
|
HEC-P40The HEC-P40 is a connector kit for the P-Series Harsh Environment Family. It includes the pins and connector to interface to the P-Series Harsh Environment's 'D' Connector. |
138-1088981 GB SLC MicroSD Flash card with extended temperature range for data logging and storage on P-Series PLC on a Chip â„¢ based products. |
|
HEC-P100The HEC-P100 is a cable assembly for the P-Series Harsh Environment Family. The HEC-P100 is a pre-wired assembly for the 'A' Connector with flying leads on the opposite end. |
138-1078102 GB SLC MicroSD Flash card with extended temperature range for data logging and storage on P-Series PLC on a Chip â„¢ based products. |
|
HEC-P110The HEC-P110 is a cable assembly for the P-Series Harsh Environment Family. The HEC-P110 is a pre-wired assembly for the 'B' Connector with flying leads on the opposite end. |
HEC-P910The HEC-P910 is a programming breakout cable for the P-Series Harsh Environment Controllers. One end of the cable connects directly to the P-Series Harsh Environment Controller and splits the other end into one Deutsch connector and one 9-pin D-sub connector (one for the original 'A' connector and one for the program cable). The HEC-P910 is connected in place of the 'A' connector and then the original 'A' connector is plugged into the Deutsch connector. A Null Modem cable is required for programming and connects to the 9-pin d-sub connector and to the computer's serial port. |
|
HEC-P120The HEC-P120 is a cable assembly for the P-Series Harsh Environment Family. The HEC-P120 is a pre-wired assembly for the 'C' Connector with flying leads on the opposite end.
|
HEC-P130The HEC-P130 is a cable assembly for the P-Series Harsh Environment Family. The HEC-P130 is a pre-wired assembly for the 'D' Connector with flying leads on the opposite end. |
|
OPTICFGTOOL-01The OPTICFGTOOL-01 is the OptiCAN Configuration Tool Professional. This includes the software, USB-CAN interface and required cabling. The OPTICFGTOOL-01 allows the use of OptiCAN Networks of more than 10 nodes (drops) as well as providing additional software tools for diagnosing network issues. |
HEC-1100The HEC-1100 is a Harsh Environment Series Digital I/O Expansion Module. The HEC-1100 is compatible with any OptiCAN enabled controller and provides additional digital I/O. The HEC-1100 is IP67 and be submersed in up to 3 feet of water. This module provides an additional 8 Inputs rated 8-32VDC and 8 Outputs rated 8-32VDC @ 2A. The HEC-1100 receives I/O commands via the OptiCAN Network via a CAN port. |
138-106865The 138-106865 is a USB to RS232 Serial Adaptor/Converter cable. Ideal for today's needs where many computers are no longer designed with Serial Ports, this adaptor is the recommended model for use with Divelbiss controller products. It is based on the FTDI chipset. |
|
HEC-P10The HEC-P10 is a connector kit for the P-Series Harsh Environment Family. It includes the pins and connector to interface to the P-Series Harsh Environment's 'A' Connector. |
HEC-PS5The HEC-PS5 isdesigned to operate with the Harsh Environment (HEC) product line. It is ideal for situations where 5VDC is required to operate external devices such as joysticks, etc. The HEC-PS5 operates on 8-32VDC and can supply 5VDC. The output current specification is based in input power and ambient temperature. |
|
HEC-P20The HEC-P20 is a connector kit for the P-Series Harsh Environment Family. It includes the pins and connector to interface to the P-Series Harsh Environment's 'B' Connector. |
HEC-OC-INTThe HEC-OC-INT converts field device open collector outputs for connection to standard HEC Inputs. The HEC-OC-INT converts outputs that are open collector (NPN) types for use with HEC products that have current sinking (PNP) input requirements. |
|
HEC-P30The HEC-P30 is a connector kit for the P-Series Harsh Environment Family. It includes the pins and connector to interface to the P-Series Harsh Environment's 'C' Connector. |
126-102860Null Modem Programming cable, RS232. 6ft in length and connects 9-pin 'D' female to 9-pin 'D' female. |
|
HEC-P40The HEC-P40 is a connector kit for the P-Series Harsh Environment Family. It includes the pins and connector to interface to the P-Series Harsh Environment's 'D' Connector. |
138-1088981 GB SLC MicroSD Flash card with extended temperature range for data logging and storage on P-Series PLC on a Chip â„¢ based products. |
|
HEC-P100The HEC-P100 is a cable assembly for the P-Series Harsh Environment Family. The HEC-P100 is a pre-wired assembly for the 'A' Connector with flying leads on the opposite end. |
138-1078102 GB SLC MicroSD Flash card with extended temperature range for data logging and storage on P-Series PLC on a Chip â„¢ based products. |
|
HEC-P110The HEC-P110 is a cable assembly for the P-Series Harsh Environment Family. The HEC-P110 is a pre-wired assembly for the 'B' Connector with flying leads on the opposite end. |
HEC-P910The HEC-P910 is a programming breakout cable for the P-Series Harsh Environment Controllers. One end of the cable connects directly to the P-Series Harsh Environment Controller and splits the other end into one Deutsch connector and one 9-pin D-sub connector (one for the original 'A' connector and one for the program cable). The HEC-P910 is connected in place of the 'A' connector and then the original 'A' connector is plugged into the Deutsch connector. A Null Modem cable is required for programming and connects to the 9-pin d-sub connector and to the computer's serial port. |
|
HEC-P120The HEC-P120 is a cable assembly for the P-Series Harsh Environment Family. The HEC-P120 is a pre-wired assembly for the 'C' Connector with flying leads on the opposite end.
|
HEC-P130The HEC-P130 is a cable assembly for the P-Series Harsh Environment Family. The HEC-P130 is a pre-wired assembly for the 'D' Connector with flying leads on the opposite end. |
|
VC-CELL/GPS-EXT-2FT2 foot antenna extension cable for Cellular or GPS options on VersaCloud enabled devices and controllers. Designed for connecting VersaCloud M2M enabled cellular / GPS equipment located inside a control panel or enclosure to an external antenna. Includes insulating hardware. |
VC-CELL/GPS-EXT-5FT5 foot antenna extension cable for Cellular or GPS options on VersaCloud enabled devices and controllers. Designed for connecting VersaCloud M2M enabled cellular / GPS equipment located inside a control panel or enclosure to an external antenna. Includes insulating hardware. |
|
HEC-P5-GPSThe HEC-P5-GPS is an external, plug-in GPS Module for the HEC-P-Series Harsh Environment Controllers and Gateways. The module GPS functions are accessed in the ladder diagram using Structured Text functions and function blocks. |
OPTICFGTOOL-01The OPTICFGTOOL-01 is the OptiCAN Configuration Tool Professional. This includes the software, USB-CAN interface and required cabling. The OPTICFGTOOL-01 allows the use of OptiCAN Networks of more than 10 nodes (drops) as well as providing additional software tools for diagnosing network issues. |
HEC-1100The HEC-1100 is a Harsh Environment Series Digital I/O Expansion Module. The HEC-1100 is compatible with any OptiCAN enabled controller and provides additional digital I/O. The HEC-1100 is IP67 and be submersed in up to 3 feet of water. This module provides an additional 8 Inputs rated 8-32VDC and 8 Outputs rated 8-32VDC @ 2A. The HEC-1100 receives I/O commands via the OptiCAN Network via a CAN port. |
138-106865The 138-106865 is a USB to RS232 Serial Adaptor/Converter cable. Ideal for today's needs where many computers are no longer designed with Serial Ports, this adaptor is the recommended model for use with Divelbiss controller products. It is based on the FTDI chipset. |
|
HEC-P10The HEC-P10 is a connector kit for the P-Series Harsh Environment Family. It includes the pins and connector to interface to the P-Series Harsh Environment's 'A' Connector. |
HEC-PS5The HEC-PS5 isdesigned to operate with the Harsh Environment (HEC) product line. It is ideal for situations where 5VDC is required to operate external devices such as joysticks, etc. The HEC-PS5 operates on 8-32VDC and can supply 5VDC. The output current specification is based in input power and ambient temperature. |
|
HEC-P20The HEC-P20 is a connector kit for the P-Series Harsh Environment Family. It includes the pins and connector to interface to the P-Series Harsh Environment's 'B' Connector. |
HEC-OC-INTThe HEC-OC-INT converts field device open collector outputs for connection to standard HEC Inputs. The HEC-OC-INT converts outputs that are open collector (NPN) types for use with HEC products that have current sinking (PNP) input requirements. |
|
HEC-P30The HEC-P30 is a connector kit for the P-Series Harsh Environment Family. It includes the pins and connector to interface to the P-Series Harsh Environment's 'C' Connector. |
126-102860Null Modem Programming cable, RS232. 6ft in length and connects 9-pin 'D' female to 9-pin 'D' female. |
|
HEC-P40The HEC-P40 is a connector kit for the P-Series Harsh Environment Family. It includes the pins and connector to interface to the P-Series Harsh Environment's 'D' Connector. |
138-1088981 GB SLC MicroSD Flash card with extended temperature range for data logging and storage on P-Series PLC on a Chip â„¢ based products. |
|
HEC-P100The HEC-P100 is a cable assembly for the P-Series Harsh Environment Family. The HEC-P100 is a pre-wired assembly for the 'A' Connector with flying leads on the opposite end. |
138-1078102 GB SLC MicroSD Flash card with extended temperature range for data logging and storage on P-Series PLC on a Chip â„¢ based products. |
|
HEC-P110The HEC-P110 is a cable assembly for the P-Series Harsh Environment Family. The HEC-P110 is a pre-wired assembly for the 'B' Connector with flying leads on the opposite end. |
HEC-P910The HEC-P910 is a programming breakout cable for the P-Series Harsh Environment Controllers. One end of the cable connects directly to the P-Series Harsh Environment Controller and splits the other end into one Deutsch connector and one 9-pin D-sub connector (one for the original 'A' connector and one for the program cable). The HEC-P910 is connected in place of the 'A' connector and then the original 'A' connector is plugged into the Deutsch connector. A Null Modem cable is required for programming and connects to the 9-pin d-sub connector and to the computer's serial port. |
|
HEC-P120The HEC-P120 is a cable assembly for the P-Series Harsh Environment Family. The HEC-P120 is a pre-wired assembly for the 'C' Connector with flying leads on the opposite end.
|
HEC-P130The HEC-P130 is a cable assembly for the P-Series Harsh Environment Family. The HEC-P130 is a pre-wired assembly for the 'D' Connector with flying leads on the opposite end. |
|
VC-CELL/GPS-EXT-2FT2 foot antenna extension cable for Cellular or GPS options on VersaCloud enabled devices and controllers. Designed for connecting VersaCloud M2M enabled cellular / GPS equipment located inside a control panel or enclosure to an external antenna. Includes insulating hardware. |
VC-CELL/GPS-EXT-5FT5 foot antenna extension cable for Cellular or GPS options on VersaCloud enabled devices and controllers. Designed for connecting VersaCloud M2M enabled cellular / GPS equipment located inside a control panel or enclosure to an external antenna. Includes insulating hardware. |
|
OPTICFGTOOL-01The OPTICFGTOOL-01 is the OptiCAN Configuration Tool Professional. This includes the software, USB-CAN interface and required cabling. The OPTICFGTOOL-01 allows the use of OptiCAN Networks of more than 10 nodes (drops) as well as providing additional software tools for diagnosing network issues. |
HEC-1100The HEC-1100 is a Harsh Environment Series Digital I/O Expansion Module. The HEC-1100 is compatible with any OptiCAN enabled controller and provides additional digital I/O. The HEC-1100 is IP67 and be submersed in up to 3 feet of water. This module provides an additional 8 Inputs rated 8-32VDC and 8 Outputs rated 8-32VDC @ 2A. The HEC-1100 receives I/O commands via the OptiCAN Network via a CAN port. |
138-106865The 138-106865 is a USB to RS232 Serial Adaptor/Converter cable. Ideal for today's needs where many computers are no longer designed with Serial Ports, this adaptor is the recommended model for use with Divelbiss controller products. It is based on the FTDI chipset. |
|
HEC-P10The HEC-P10 is a connector kit for the P-Series Harsh Environment Family. It includes the pins and connector to interface to the P-Series Harsh Environment's 'A' Connector. |
HEC-PS5The HEC-PS5 isdesigned to operate with the Harsh Environment (HEC) product line. It is ideal for situations where 5VDC is required to operate external devices such as joysticks, etc. The HEC-PS5 operates on 8-32VDC and can supply 5VDC. The output current specification is based in input power and ambient temperature. |
|
HEC-P20The HEC-P20 is a connector kit for the P-Series Harsh Environment Family. It includes the pins and connector to interface to the P-Series Harsh Environment's 'B' Connector. |
HEC-OC-INTThe HEC-OC-INT converts field device open collector outputs for connection to standard HEC Inputs. The HEC-OC-INT converts outputs that are open collector (NPN) types for use with HEC products that have current sinking (PNP) input requirements. |
|
HEC-P30The HEC-P30 is a connector kit for the P-Series Harsh Environment Family. It includes the pins and connector to interface to the P-Series Harsh Environment's 'C' Connector. |
126-102860Null Modem Programming cable, RS232. 6ft in length and connects 9-pin 'D' female to 9-pin 'D' female. |
|
HEC-P40The HEC-P40 is a connector kit for the P-Series Harsh Environment Family. It includes the pins and connector to interface to the P-Series Harsh Environment's 'D' Connector. |
138-1088981 GB SLC MicroSD Flash card with extended temperature range for data logging and storage on P-Series PLC on a Chip â„¢ based products. |
|
HEC-P100The HEC-P100 is a cable assembly for the P-Series Harsh Environment Family. The HEC-P100 is a pre-wired assembly for the 'A' Connector with flying leads on the opposite end. |
138-1078102 GB SLC MicroSD Flash card with extended temperature range for data logging and storage on P-Series PLC on a Chip â„¢ based products. |
|
HEC-P110The HEC-P110 is a cable assembly for the P-Series Harsh Environment Family. The HEC-P110 is a pre-wired assembly for the 'B' Connector with flying leads on the opposite end. |
HEC-P910The HEC-P910 is a programming breakout cable for the P-Series Harsh Environment Controllers. One end of the cable connects directly to the P-Series Harsh Environment Controller and splits the other end into one Deutsch connector and one 9-pin D-sub connector (one for the original 'A' connector and one for the program cable). The HEC-P910 is connected in place of the 'A' connector and then the original 'A' connector is plugged into the Deutsch connector. A Null Modem cable is required for programming and connects to the 9-pin d-sub connector and to the computer's serial port. |
|
HEC-P120The HEC-P120 is a cable assembly for the P-Series Harsh Environment Family. The HEC-P120 is a pre-wired assembly for the 'C' Connector with flying leads on the opposite end.
|
HEC-P130The HEC-P130 is a cable assembly for the P-Series Harsh Environment Family. The HEC-P130 is a pre-wired assembly for the 'D' Connector with flying leads on the opposite end. |
|
VC-WIFI-EXT-2FT2 foot antenna extension cable for Wi-Fi option on VersaCloud enabled devices and controllers. Designed for connecting VersaCloud M2M enabled Wi-Fi equipment located inside a control panel or enclosure to an external antenna. Includes insulating hardware. |
VC-WIFI-EXT-5FT5 foot antenna extension cable for Wi-Fi option on VersaCloud enabled devices and controllers. Designed for connecting VersaCloud M2M enabled Wi-Fi equipment located inside a control panel or enclosure to an external antenna. Includes insulating hardware. |
|
HEC-P5-GPSThe HEC-P5-GPS is an external, plug-in GPS Module for the HEC-P-Series Harsh Environment Controllers and Gateways. The module GPS functions are accessed in the ladder diagram using Structured Text functions and function blocks. |
OPTICFGTOOL-01The OPTICFGTOOL-01 is the OptiCAN Configuration Tool Professional. This includes the software, USB-CAN interface and required cabling. The OPTICFGTOOL-01 allows the use of OptiCAN Networks of more than 10 nodes (drops) as well as providing additional software tools for diagnosing network issues. |
HEC-1100The HEC-1100 is a Harsh Environment Series Digital I/O Expansion Module. The HEC-1100 is compatible with any OptiCAN enabled controller and provides additional digital I/O. The HEC-1100 is IP67 and be submersed in up to 3 feet of water. This module provides an additional 8 Inputs rated 8-32VDC and 8 Outputs rated 8-32VDC @ 2A. The HEC-1100 receives I/O commands via the OptiCAN Network via a CAN port. |
138-106865The 138-106865 is a USB to RS232 Serial Adaptor/Converter cable. Ideal for today's needs where many computers are no longer designed with Serial Ports, this adaptor is the recommended model for use with Divelbiss controller products. It is based on the FTDI chipset. |
|
HEC-P10The HEC-P10 is a connector kit for the P-Series Harsh Environment Family. It includes the pins and connector to interface to the P-Series Harsh Environment's 'A' Connector. |
HEC-PS5The HEC-PS5 isdesigned to operate with the Harsh Environment (HEC) product line. It is ideal for situations where 5VDC is required to operate external devices such as joysticks, etc. The HEC-PS5 operates on 8-32VDC and can supply 5VDC. The output current specification is based in input power and ambient temperature. |
|
HEC-P20The HEC-P20 is a connector kit for the P-Series Harsh Environment Family. It includes the pins and connector to interface to the P-Series Harsh Environment's 'B' Connector. |
HEC-OC-INTThe HEC-OC-INT converts field device open collector outputs for connection to standard HEC Inputs. The HEC-OC-INT converts outputs that are open collector (NPN) types for use with HEC products that have current sinking (PNP) input requirements. |
|
HEC-P30The HEC-P30 is a connector kit for the P-Series Harsh Environment Family. It includes the pins and connector to interface to the P-Series Harsh Environment's 'C' Connector. |
126-102860Null Modem Programming cable, RS232. 6ft in length and connects 9-pin 'D' female to 9-pin 'D' female. |
|
HEC-P40The HEC-P40 is a connector kit for the P-Series Harsh Environment Family. It includes the pins and connector to interface to the P-Series Harsh Environment's 'D' Connector. |
138-1088981 GB SLC MicroSD Flash card with extended temperature range for data logging and storage on P-Series PLC on a Chip â„¢ based products. |
|
HEC-P100The HEC-P100 is a cable assembly for the P-Series Harsh Environment Family. The HEC-P100 is a pre-wired assembly for the 'A' Connector with flying leads on the opposite end. |
138-1078102 GB SLC MicroSD Flash card with extended temperature range for data logging and storage on P-Series PLC on a Chip â„¢ based products. |
|
HEC-P110The HEC-P110 is a cable assembly for the P-Series Harsh Environment Family. The HEC-P110 is a pre-wired assembly for the 'B' Connector with flying leads on the opposite end. |
HEC-P910The HEC-P910 is a programming breakout cable for the P-Series Harsh Environment Controllers. One end of the cable connects directly to the P-Series Harsh Environment Controller and splits the other end into one Deutsch connector and one 9-pin D-sub connector (one for the original 'A' connector and one for the program cable). The HEC-P910 is connected in place of the 'A' connector and then the original 'A' connector is plugged into the Deutsch connector. A Null Modem cable is required for programming and connects to the 9-pin d-sub connector and to the computer's serial port. |
|
HEC-P120The HEC-P120 is a cable assembly for the P-Series Harsh Environment Family. The HEC-P120 is a pre-wired assembly for the 'C' Connector with flying leads on the opposite end.
|
HEC-P130The HEC-P130 is a cable assembly for the P-Series Harsh Environment Family. The HEC-P130 is a pre-wired assembly for the 'D' Connector with flying leads on the opposite end. |
|
VC-WIFI-EXT-2FT2 foot antenna extension cable for Wi-Fi option on VersaCloud enabled devices and controllers. Designed for connecting VersaCloud M2M enabled Wi-Fi equipment located inside a control panel or enclosure to an external antenna. Includes insulating hardware. |
VC-CELL/GPS-EXT-2FT2 foot antenna extension cable for Cellular or GPS options on VersaCloud enabled devices and controllers. Designed for connecting VersaCloud M2M enabled cellular / GPS equipment located inside a control panel or enclosure to an external antenna. Includes insulating hardware. |
|
VC-WIFI-EXT-5FT5 foot antenna extension cable for Wi-Fi option on VersaCloud enabled devices and controllers. Designed for connecting VersaCloud M2M enabled Wi-Fi equipment located inside a control panel or enclosure to an external antenna. Includes insulating hardware. |
VC-CELL/GPS-EXT-5FT5 foot antenna extension cable for Cellular or GPS options on VersaCloud enabled devices and controllers. Designed for connecting VersaCloud M2M enabled cellular / GPS equipment located inside a control panel or enclosure to an external antenna. Includes insulating hardware. |
|
HEC-P5-GPSThe HEC-P5-GPS is an external, plug-in GPS Module for the HEC-P-Series Harsh Environment Controllers and Gateways. The module GPS functions are accessed in the ladder diagram using Structured Text functions and function blocks. |
OPTICFGTOOL-01The OPTICFGTOOL-01 is the OptiCAN Configuration Tool Professional. This includes the software, USB-CAN interface and required cabling. The OPTICFGTOOL-01 allows the use of OptiCAN Networks of more than 10 nodes (drops) as well as providing additional software tools for diagnosing network issues. |