Your Shopping Cart Your Shopping Cart
Get the latest Product Catalog
 
Use our Product Finder tool to select your product.

Products similar to

HEC-P6100

HEC-P5100
P-Series PLC on a Chip™ based Harsh Environment Controller (HEC) / PLC with 16 Digital Inputs (8-32VDC), 16 Digital Outputs (8-32VDC, up to 2 Amps each) with current feedback monitoring, 2 Field accessible analog inputs (0-20mA/0-5VDC/0-10VDC), SD Card Interface, 2 CAN ports (SAE J1939, NMEA 2000, OptiCAN) and up to 6 Counter / Timer Channels. Made in the USA.
HEC-P6110
HEC-P6000 Series Harsh Environment Controller (HEC) / PLC with 14 Digital Inputs / 14 Digital Outputs (8-32VDC), 4 analog inputs (0-20mA/0-5VDC/0-10VDC), 2 Analog Outputs (0-10VDC), 2 CAN ports (SAE J1939, NMEA 2000, OptiCAN), Cellular Data Modem, up to 6 Counter / Timer Channels and MicroSD Card Interface.VersaCloud M2M Enabled. Made in the USA.
HEC-P6200
HEC-P6000 Series Harsh Environment Controller (HEC) / PLC with 14 Digital Inputs / 14 Digital Outputs (8-32VDC), 4 analog inputs (0-20mA/0-5VDC/0-10VDC), 2 Analog Outputs (0-10VDC), Wi-Fi Connectivity, GPS Port, 2 CAN ports (SAE J1939, NMEA 2000, OptiCAN), up to 6 Counter / Timer Channels, Real Time Clock, 2 RS232/RS485 Serial Ports (Modbus Master & Slave) and MicroSD Card Interface.VersaCloud M2M Enabled. Made in the USA.

The HEC-P6100 Harsh Environment PLC with Analog I/O and Digital I/O

The HEC-P6100 is based on the P-Series generation of PLC on a Chip™. It is an ideal choice for applications where expanded Digital I/O or Analog I/O are needed.

The HEC-P6100 Controller is a Harsh Environment Controller designed to withstand tough environments in mobile, wash-down and other areas. With an operating temperature of -40° C to + 80° C, the HEC-P6100 is ideal for nearly any environment.

Digital Inputs
The HEC-P6100 has a total of 14 digital inputs, with 8 dedicated digital inputs rated 8-32VDC that can be configured as sinking or sourcing. The 6 additional digital inputs are may be used as digital inputs or as counter / timer inputs (3 counter / timer and 3 quadrature counter ). These counter channels are rated 8-32VDC and configurable as PNP/NPN.

Digital Outputs
The HEC-P6100 has total of 14 digital outputs, that are rated 8-32VDC up to 2A each. Up to 4 channels have current feedback monitoring via analog inputs for closed loop control. There are 4 groups of outputs (3 groups of 4 and 1 group of 2). The 3 groups of 4 may be used as on/off digital outputs or as Pulse Width Modulation (PWM) outputs while the group of 2 outputs is on/off digital output only. All the digital outputs are sourcing and each group have independent power pins to allow output groups to operate at different voltage levels.

Analog Inputs
The HEC-P6100 has 4 field accessible Analog Inputs, each channel individually configurable as 0-5VDC, 0-10VDC or 0-20mADC with 12-bit resolution. There are 3 internal analog inputs dedicated for digital output current feedback and 1 internal channel that is configurable between digital output current feedback and input power monitoring.

Analog Outputs
The HEC-P6100 has 2 analog outputs rated 0-10VDC with 12-bit resolution. Each channel has internal span calibration potentiometers for field calibration, if field calibration is required.

Communications
The HEC-P6100 provides powerful communications with two CAN ports that support SAE J1939, NMEA 2000 and OptiCAN.

Additional Features
Additional features include User programmable LEDs, 2 internal user programmable slide switches, FRAM retentive memory, EEPROM storage and a Micro SD Card Socket that may be used for software updates or data logging.

The HEC-P6100 PLC provides powerful control and  features including digital and analog I/O in a sealed, robust enclosure ideal for extended temperatures, wash-down areas and mobile equipment.
Click Picture to Enlarge-
Actual Product May Vary
 
Web Price: $586.00
VersaCloud m2M Enabled RoHS Compliant
  • Features & Contents
  • Specifications
  • Compatible Products / Accessories
  • Documents / Downloads
  • Warranty

 The HEC-P6100 Harsh Environment PLC with Analog I/O and Digital I/O Features:
- 14 Digital Inputs and 14 Digital Outputs
- Up to 6 Counter / Timer Inputs
- Supports Quadrature Input
- Outputs up to 2A per point.
- Digital Outputs have independent source pins for different voltages of output groups.
- Some Digital Outputs provide load current feedback via analog inputs
- Outputs support Pulse Width Modulation (PWM)
- Micro SD Card Socket and Support for Software Updates and Data Logging
- 4 Analog Inputs, Configurable 0-20mA, 0-5VDC or 0-10VDC, 12 Bit
- 2 Analog Outputs, rated 0-10VDC, 12 Bit
- 2 CAN Ports
- Networking: J1939, NMEA 2000, OptiCAN
- RoHS Compliant
- Extended Temperature Range: -40 to 80 degrees C
- Programs in Ladder Diagram using EZ LADDER® Toolkit

 Included with The HEC-P6100 Harsh Environment PLC with Analog I/O and Digital I/O
Qty Part Number   Description
1 HEC-P6100   HEC-P6000 Series Harsh Environment Controller, Model 6100


CPU / Programming Specifications
Processor: P-Series PLC on a Chip™ based.
Programming Language: Ladder Diagram, Function Block and Structured Text using EZ LADDER Toolkit
 
Memory Specifications
Flash Program Storage: 512K
RAM: 32K
EEPROM: 3500 Bytes
FRAM Retentive Memory: 480 Bytes
 
Digital I/O Specifications
Number of Inputs: 14
Input Type: 8 Inputs are Sinking / Sourcing by Group of 5, Group of 3. 6 Remaining Inputs either as Input or Counter / Timer compatible with PNP and NPN devices
Input Voltage: 8-32VDC
Number of Outputs: 14
Output Type: Solid-State Sourcing, 4 Groups of 3, 1 Group of 2 Outputs with individual power source pins per group to allow for different voltages.
Output Voltage: 8-32VDC (Set per group of Outputs via power source pin per group)
Output Current: 2A Maximum per output
Over-current Protection: Solid-State: Yes
Pulse Width Modulation Outputs: Yes, 12 of the 14 Solid-State Outputs can be configured as either Digital Output or Pulse Width Modulation Output (PWM)
Pulse Width Modulation Frequency: 1.0 Hz to 1.0 KHz
Counter Inputs: 6 Counter Inputs, 3 -Count Up , 3 for Quadrature Input
Counter Input Frequency: Up Counters: 100KHz Maximum, Quadrature Input: 100KHz Maximum
I/O Expandable: Yes, Using OptiCAN Network and other Harsh Environment I/O Modules (HEC)
Output Current Feedback: Yes, using up to 4 internal Analog Inputs for selected outputs
LED Indicators: 2 Programmable LED Indicators, 2 Status LED Indicators
 
Analog I/O Specifications
Input Power Monitor: Yes, selectable as one analog input channel or input channel may be used for output current feedback.
Number of Analog Inputs: 4 Field Accessible Channels
Analog Input Rating: 2 Field Selectable Channels, 0-5VDC, 0-10VDC or 0-20mADC
Analog Input Resolution: 12-Bit
Number of Analog Outputs: 2 Field Accessible Channels
Analog Output Rating: 0-10VDC
Analog Output Resolution: 12-Bit
 
Power Specifications
Input Power: 8-32VDC
 
Other Specifications
Number of CAN Ports: 2
Networking Yes, J1939, NMEA 2000, OptiCAN
SD Card Interface: Yes, Micro SD Card Interface Installed. May be used for updating software or data logging
 
Mechanical and Environmental Specifications
Operating Temperature: -40C to 80C
Storage Temperature: -40C to 85C
Dimensions: 6.3" x 7.92" x 2.15"
Enclosure: Yes, Sealed Plastic
Mounting: Subplate Mount
Environmental: RoHS Compliant

*All Product Specifications Subject to Change without Notice


 Compatible PLCs / Programmable Logic Controllers
Enhanced Baby Bear Programmable Logic Controllers
Open Board PLCs based on PLC on a Chip™. Digital Inputs / Digital Outputs, CAN port and Serial Communication. Expandable I/O.
PCS Controllers
Din-rail mount Programmable Logic Controllers based on PLC on a Chip™. Analog Inputs, Analog Outputs, PWM Outputs, High Speed Counters, Grayscale Encoder Inputs, CAN ports and Serial Communications.
Extended Temperature Harsh Environment Human Machine Interface (HMI) Programmable Logic Controllers
Combined HMI/PLCs designed for Harsh Environments and extended temperature areas.
Harsh Environment Programmable Logic Controllers, HEC - Extended Temperature Range
Extended Temperature Range PLCs for Harsh Areas. Sealed to withstand washdown areas and ideal for Electrohydraulic control and mobile applications. Digital Inputs / Digital Outputs, Serial Communciations, CAN ports and PWM Outputs.
P-Series Bear Bones Programmable Logic Controllers
Open-Board programmable Logic Controllers with many control features, extended temperature range and mechanical drop-in capability for legacy Bear Bones users.
 
 Compatible HMIs / Human Machine Interfaces
Extended Temperature Range Harsh Environment (HEC) Human to Machine Interfaces (HMIs)
  HMIs designed for Harsh Environments and extended temperature areas.
 
 Compatible Digital I/O / Multifunction I/O
Harsh Environment Controller (HEC) Digital I/O Expansion Modules
Digital I/O Expansion Modules for the Harsh Environment Controller (HEC) Product Family.
P-Series Bear Bones Controller's Digital I/O Expansion Boards
Open-Board Digital I/O Expanders for the P-Series Bear Bones Controllers. Mechanical drop-in capability for legacy Bear Bones I/O users (when used with P-Series Bear Bones controllers).
 
 Compatible Digital I/O Cables
HEC-P10
P-Series Harsh Environment Controller (HEC) A Connector Kit.
HEC-P20
P-Series Harsh Environment Controller (HEC) B Connector Kit.
HEC-P30
P-Series Harsh Environment Controller (HEC) C Connector Kit.
HEC-P40
P-Series Harsh Environment Controller (HEC) D Connector Kit.
HEC-P100
P-Series Harsh Environment Controller (HEC) A Connector Cable Assembly with flying leads.
HEC-P110
P-Series Harsh Environment Controller (HEC) B Connector Cable Assembly with flying leads.
HEC-P120
P-Series Harsh Environment Controller (HEC) C Connector Cable Assembly with flying leads.
HEC-P130
P-Series Harsh Environment Controller (HEC) D Connector Cable Assembly with flying leads.
 
 Compatible Software Products
EZLDCD-01
EZ LADDER® Toolkit, Standard Edition on USB Flash Drive. Made in the USA.
OPTICFGTOOL-01
OptiCAN Configuration Tool Professional Edition. Includes software and hardware to configure OptiCAN networks directly from a computer (USB) port. Made in the USA.
 
 Compatible Programming Cables
HEC-P910
HEC P-Series programming breakout cable. In-line programming cable with 9-pin D-Sub connector for programming HEC-P Series controllers. Requires null-modem cable to interface to computer's serial port.
138-106865
USB to RS232 Serial Port (COM Port) Cable.
126-102860
Null Modem Programming Cable, RS232, 9-Pin D Female to 9-Pin D Female.
 
 Other Compatble Accessories
HEC-PS5
External 5VDC Peripheral Power Supply for HEC Products. Connects directly to input power (8-32VDC) and provides 5VDC supply for devices such as joysticks, etc.
HEC-OC-INT
Open Collector Converter for HEC Products.


Current Revision Downloads for HEC-P6100 View All Download Versions

 Manuals / Datasheets / How To's / Other Documents
Title Description File Released Size
HEC-P6000 Series User Manual HEC-P6000 Harsh Environment Controller Series User Manual Download 1/20/2017 6185K
HEC-P6000 Series Brochure HEC-P6000 Harsh Environment Controller Series Brochure Download 1/20/2017 412K

 Software
Title Description File Released Size
No Current Software Versions Found

This product is covered under the Warranty and Limitation of Liability section of our Terms and Conditions.