Your Shopping Cart Your Shopping Cart
Get the latest Product Catalog
 
Use our Product Finder tool to select your product.

Solves-It! Pre-programmed Plug-in Application Control Modules

Solves-It! Application Modules are pre-programmed, plug-in modules for specific applications. These are based on the Solves-It! Plug-in PLC and provide easy to implement application solutions for common industry needs (Timing, Sequencing, Counting).

Each Solves-It! Application Module is pre-programmed from the factory, but with the purchase of a programming cable and use of our Standard Edition EZ LADDER® Toolkit software, the application program can be changed or modified as needed allowing for complete software customization to your needs. Just download the application software, make your modifications and load the new program into the application module.

Solves-It! Application Modules are pre-programmed, plug-in modules for specific applications for pump alternating, timing, counting and more.
Solves-It! Plug-in Programmable Pre-Programmed Tachometer Application Module.
   
  • Standard Models
  • Build to Order / Other Models

The following Part Numbers / Models are typically available for purchase. Product Delivery time may vary.

Model Number   Description
     
SI-APPMOD-2PUMPALTERNATE Solves-It! Programmable Plug-in 2 Pump Alternating Control Module. Controls 2 Pumps operation - alternates between the two pumps when pumping is required. Made in the USA.
SI-APPMOD-3PUMPALTERNATE Solves-It! Programmable Plug-in 3 Pump Alternating Control Module.. Controls 3 Pumps operation - sequences between the three pumps when pumping is required. Made in the USA.
SI-APPMOD-DEADBAND New Specifications for the SI-APPMOD-DEADBAND Solves-It! Programmable Control Module for Analog Deadband Detection. Compares analog input signal to a +/- tolerance of the setpoint. Outputs: Above Deadband, Below Deadband, In Deadband. Now shipping REV 2.0 Hardware with updated specifications. Made in the USA.
SI-APPMOD-HOURMETER Solves-It! Programmable Hourmeter Module with Alarm Setpoints and Outputs. On power timer increments hourmeter in 1 second increments. Two alarm setpoint outputs. Made in the USA.
SI-APPMOD-MULTICOUNT Solves-It! Programmable Counting Module with 3 programmable channel settings and control outputs. Three counter channels from a single input source. Each channel has individual setpoint, output and reset. Made in the USA.
SI-APPMOD-RANGECOMPARE New Specifications for the SI-APPMOD-RANGECOMPARE Solves-It! Programmable Control Module for Analog Signal in-range, below range, or above range detection. Analog input is compared to two setpoints to determine if between them (in range). Outputs: Above Range, Below Range, In Range. Now shipping REV 2.0 Hardware with updated specifications. Made in the USA.
SI-APPMOD-TACHOMETER Solves-It! Programmable Tachometer Application Module with RPM calculation, 4 programmable setpoints and 4 outputs. Input pulses are read and RPM is calculated and displayed. Based on a 60 Tooth Gear (can be changed). 4 Programmable RPM setpoints to control 4 individual alarm outputs. Made in the USA.
SI-APPMOD-TIMES4 Solves-It! Programmable Timer Application Module. 4 Configurable timer channels as On-Delay or Off-Delay. Each channel has an ENABLE and a controlled Output. Made in the USA.

The following products are either not stocked or are obsolete. Non-stocked Models will have varying delivery times. Most obsolete Models will have replacements available. See Product Details for replacements.

Model Number Description Status Replacement
       
No Non-Stocked or Other Models Found